RP-SMA male Right Angle To RP-SMA female straight: 20-inch 22" 2FT 30" 3FT 4FT 5FT 6FT
- SKU:
- RSmRA3ftRSf100
- Availability:
- In stock
- Weight:
- 0.07 LBS
Data Alliance
RP-SMA Male Right Angle to RP-SMA Female Straight
Antenna Cable: RP-SMA Male Right-Angle To RP-SMA Female (regular straight type): Double-shielded cable.
- We also have this cable in lengths ranging from 4-inch to 18-inch
- One end has an RP-SMA-male right-angle type connector, and the other end has an RP-SMA-female connector, regular straight type, and with bulkhead mount (nut and washer).
- Our RP-SMA Male Right Angle to RP-SMA Female Straight Antenna Cable is built to last. High-quality soldered terminations of RP-SMA connectors provide a low-loss connection with discontinuities kept to a minimum. This ensures a reliable and durable performance, even in demanding environments.
Antenna Cable Coax is double-shielded, low-loss, and very flexible.
- The cable type is equivalent to or better than LMR-100: Coax with a black jacket has the same or better signal loss per meter and flexibility as LMR100 and less attenuation (signal loss) than RG174.
- This cable is rated for outdoor use and is also suitable for indoor use.
- The higher quality of the cable of this antenna translates into lower loss/better performance.
- Cable is equivalent to LMR-100 in thickness.
- The recommended tightest bend radius is 1 inch (28mm).
The temperature range for operational use of this 100-series coax and the cable assembly is -22 F ~ +185 F (-30 C ~ +85 C)
RP-SMA female connector includes a bulkhead nut and washer for mounting & waterproofing:
- This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection) or on a case, panel, or Printed Circuit Boardmount the connector on a case, panel or Printed Circuit Bard (PCB).
- Weatherproofing: Seal the hole where the female connector is mounted by placing an O-ring between the enclosure wall and the bulkhead nut & washer on the female connector.
- The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option, 14.5mm, which is available. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
RP SMA Connector Features and Key Information, including materials composition and dimensions
Compatibility with wireless standards & applications:
- All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMAX, 5G: Data and voice applications.
- IoT wireless, automation & M2M: Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners, and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors
Our RP-SMA extension cables' range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables make them suitable and compliant for all the above applications.
ROHS 3 and REACH: Our antenna cables comply with ROHS 3 and REACH restrictions on lead content, other heavy metals, and toxic materials.
Installing our RP-SMA male-to-female extension cable is a breeze. The RP-SMA male connector is designed to fit the jack on most WiFi routers, while the RP-SMA female connector is compatible with the male connector on antennas with an RP-SMA male connector. This straightforward installation ensures you can use our cable quickly and easily without any hassle.
RELATED PAGES: