RP-SMA-male (right-angle) To RP-SMA-female (right-angle) Cable: 18-inch, 2FT, 27-in, 30-in, 3FT

$6.16
SKU:
RSmRA18iRSfRA
Brand:

Availability:
In stock
Weight:
0.05 LBS
Antenna Cable: RP-SMA-male (right-angle) To RP-SMA-female (right-angle): 2FT Cable
  • Similar cables w/ RP-SMA connectors w/ right-angle (including other lengths of this cable)
  • The female end is an extended-version of RP-SMA-female (bulkhead type: 14mm with about 20 threads. RP-SMA extension cable.
  • RP-SMA female connector includes a bulkhead nut and washer, which can be used to mount the connector (and thus the cable) on the wall of an enclosure, case or Printed Circuit Bard (PCB).
  • Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
  • Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RP-SMA female connector includes a bulkhead nut and washer:

  • You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Bard (PCB).
  • Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
  • The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches (9.525mm). We have a longer option: 14.5mm, which we can use for special-order cable requests.
  • All of our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.

RP-SMA female diameter:

  • Hex nut accommodates a screw/bolt with 5/16" nominal outer diameter
  • In other words, the inside diameter of the hex bolt is 5/16"

Lead-free and ROHS compliant: The entire product is ROHS compliant (connectors and cable).

RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas, including wireless / WiFi networks, BlueTooth, ZigBee, Cellular voice & data, and WiMax: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

RP-SMA Connector Composition: Our RP-SMA connectors are precision machined and gold-plated for low loss.

  • Center Contact: Beryllium Copper, Gold Plated
  • Connector Body: Brass, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Cable is double-shielded, low-loss and very flexible/easily bendable. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. It's rated for outdoor use and is also suitable for indoor use.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors

Gender of RP-SMA is counter-intuitive in two ways.

  1. The gender is referring to the pins inside-not the threads. RP-SMA male has threads on inside.
  2. "RP" stands for reverse polarization: The pins are female when they appear to be male, and vice versa. 
Write a Review