RP-SMA male (right-angle) To RP-SMA male (straight) Cable: 3-inch, 6-in, 18-in, 2FT, 30-inch


In stock
0.04 LBS

RP-SMA male (right-angle) To RP-SMA male (straight) Cable

Antenna cable / adapter cable: RP-SMA male right angle connector to RP-SMA male straight connector.

  • One end has a RP-SMA-male right-angle connector and the other end has an RP-SMA male connector.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with RP-SMA female interfaces: antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Torque Ratings RP-SMA male right-angle to RP-SMA male straight

Compatibility with wireless applications: Our RP-SMA extension cables' range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.

Antenna Cable Coax is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest bend radius is 1 inch (28mm).

RG-174 and LMR-100 cable type comparing characteristics of coax.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

ROHS & REACH compliant: In compliance regarding content of heavy metals and toxic materials restricted by RoHS 3 and REACH.

RP-SMA Connector Characteristics and Details

  • RP-SMA Gender Determination: Key Points
    • The gender is referring to the pins inside-not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.


Write a Review

1 Review

  • 5
    works as expected

    Posted by Chris on 22nd Mar 2018

    We were previously contracting with a custom cable manufacturer to purchase cables like this. Data Alliance is providing us cables with equivalent performance for a fraction of the cost. No issues!