N-male To RP-SMA male Cable: 2-FT LMR200 & LMR400 coax options
- SKU:
- Nm2ftRSm200
- Availability:
- In stock
- Weight:
- 0.21 LBS
Data Alliance
N-male To RP-SMA male Cable
Antenna Cable with RP-SMA male connector on one end and an N-male connector on the other end.
- We stock many more RP-SMA-male to N-male cable options.
- This cable is rated for outdoor use and is also suitable for indoor use.
- See our mounts for antennas with N-female connectors.
- The length refers to the length of the cable between the connectors (not including the connectors).
- Allows interconnection of devices with RP-SMA female and N-female interfaces: Antennas, antenna cables and wireless devices.
- For coaxial extension (for better antenna positioning), c oaxial interface conversion, coax retrofit applications.
- Data Alliance's high-quality soldered terminations of Type-N and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
We offer two options of thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:
- 400-series coaxial cable-type (equivalent to LMR-400) has much lower attenuation (signal loss) than 200-series.
- 200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
- In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
- Double-shielding of both 200-series and 400-series enables low signal loss. Both are flexible/easily bendable (200-series is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
- Both coax options have a black PVC jacket.
The temperature range for operational use of these 200-series and 400-series cable assemblies is as follows: -31 F ~ +203 F (-35 C ~ +95 C)
N-male Connector Characteristics and Details: Durable, weatherproof connection
- The N-male connector has an interior rubber O-ring, which provides a water-tight seal.
- Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
- Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
- The N-male connector is knurled.
- N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
- N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
- Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
N materials composition:
- Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
RP-SMA Connector Characteristics and Details
- RP-SMA male and female diameter:
- RP-SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).
- RP-SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
- RP-SMA Gender Determination: Key Points
- The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
- RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
- RP-SMA-Connector Materials Composition:
- Connector Body:
- All the cables on this page that are made with 400-series coax have connectors that are nickel-plated brass (on the connector body).
- All the cables on this page that are made with 200-series coax have connectors that are gold plated brass (on the connector body).
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
- Precision machined for low loss in ISO 9001 facilities
- Other RP-SMA Characteristics and Key Points
- RP-SMA-male is also called "plug" and SMA female connector is also called "jack"
- We offer an RP-SMA wrench to assist in installing antennas, cables and adapters with RP-SMA or SMA connector(s).
- RP-SMA-male connector fits items that have an SMA-female connector.
- RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
- RP-SMA connectors are not compatible with the common, commercially available Type F coaxial connector. Type F connectors look similar but are of slightly different size and will not pair with RP-SMA or SMA connectors without an adapter.
RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.
Compatibility with wireless applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax, 5G: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of ourantenna cables and adapters with RP-SMA-male connectors
Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR , and impedance matching to 50 Ohm gear , makes them compatible and compliant for all the above applications.
RELATED PRODUCTS