Combo Antenna: 4-in-1 LTEx2 GPS WiFi - Stud Mount Puck

$35.00
SKU:
AL2W1G1
Brand:

Availability:
In stock
Weight:
1.00 LBS
Minimum Purchase:
10 units

Combo Antenna: 4-in-1 LTEx2 GPS WiFi - Stud Mount Puck

Waterproof / weatherproof antenna with through-hole mount and adhesive mount

A four-cable multiband antenna: Four internal antennas that provide coverage for four different wireless devices:

  • Use for 2 LTE connections (main and AUX), + GPS + Dual-Band WiFi (2.4GHz and 5.8 GHz)
  • Four antennas in one: Four internal antennas, and has four separate antenna cables & connectors
    • Our "stock" antennas have: SMA-male connectors on the cables of the LTE antennas and the GPS antenna, and have an RP-SMA-male connector on the WiFi antenna: This is the most typical configuration that customers need. 
    • Our "stock" antennas have 6FT cables.
    • We can customize for large orders: Cable lengths and connectors, we can customize to whatever connectors and length that you need.
  • The differences between this antenna (AL2W1G1) and AL2G1W1 are the following:
    • AL2W1G1 has a mounting stud in the rear, with the cables coming through the stud from the rear of the antenna (AL2W1G1 is the antenna on this page).
    • AL2G1W1 has the cables attached to the side, so that the antenna can mount flat on a surface (using magnetic-mounting and/or adhesive-mounting) with no need to drill a hole in the mounting surface
  • For business customers that need to order less than ten samples for testing, please contact Customer Service

Omni-Directional Dual-band MIMO Antenna

  • Puck style, permanent mount
  • Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.

Mounting / Installation Options: Through-hole Mount also called Screw Mount.

  • If mounted on a locked enclosure, it cannot be removed by vandal / thief because the nut for the screw-mount is on the inside.

Compatibility with wireless standards & applications:

  • This omni directional antenna's  range of frequency band  compatibility in the 2.4 and 5.8GHz  frequency band ranges makes it suitable and compliant for all the following applications:
  • IoT wireless  & M2MBluetoothZigBee , and ISM . Since it is vertically polarized , it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications. 
  • WiFi applications: Dal Band 2.4GHz and 5.8 GHz: 802.11AC, 802.11N, 802.11G, 802.11B
  • LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
    • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
    • Global LTE: 2600 MHz band (2.6GHz)
    • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
  • 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
    • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
  • IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m4G / LTE3G / GSM, LoRa. (Compatible because it is vertically polarized).
  • WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
  • The GPS antenna has SAW to filter other signals.
  • The GPS internal antenna has a metal shield on its bottom side as a ground plane
  • Data Alliance's high-quality soldered terminations of connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.

Item

Specifications

GPS Antenna

Dielectric Antenna

Center Frequency

1575.42±3MHz

Band Width

CF±5MHz

Polarization

RHCP

Gain

2dBic(Zenith)

V.S.W.R

<1.5

Impedance

50Ω

Axial Ratio

3dB(max)

LNA

Gain

28±2dB

Noise Figure

<1.5dB

V.S.W.R

<2.0

Supply Voltage

2.2~5V DC

Current Consumption

<15mA

LTE Antenna MAIN

Frequency Range

698~960MHz/1710~2690MHz

V.S.W.R

<3.0

Polarization

Linear

Gain

2.5dBi

Impedance

50Ω

LTE Antenna AUX

Frequency Range

698~960MHz/1710~2690MHz

V.S.W.R

<3.0

Polarization

Linear

Gain

2.0dBi

Impedance

50Ω

WIFI Antenna

Frequency Range

2400~2483.5MHz/4900~5825MHz

Polarization

Linear

Gain

3dBi

V.S.W.R

<2.0

Impedance

50Ω

Mechanical

Cable

100-Series: Length is customizable

Connector

SMA:

  • LTE MAIN
  • LTE AUX
  • GPS

RP-SMA:

  • WIFI

UL certification / rating of the flammability of the antenna housing (ABS):

  • Test Method: UL-94
  • The flame class of this ABS material is HB.

Beamwidth: H-Plane: 360-degrees: The two internal omni-directional antennas receive and send signals from 360 degrees all around. 

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

Characteristics described between LMR-100 and RG-174 coaxial cable types.

RP-SMA and SMA Connector Characteristics:

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review
s