Combo Antenna: 4-in-1 LTEx2 GPS WiFi - Adhesive / Magnet Mount

$36.99
SKU:
AL2G1W1c6FT
Brand:

Availability:
In stock
Weight:
1.00 LBS
Minimum Purchase:
10 units

Combo Antenna: 4-in-1 LTEx2 GPS WiFi - Adhesive / Magnet Mount

Waterproof / weatherproof antenna with through-hole mount and adhesive mount. A four-cable multiband antenna: Four internal antennas that provide coverage for three different wireless devices:

  • Four antennas in one: Has four internal antennas and three cables / connectors:
  • Use for 2 LTE connections (main and AUX), + GPS + Dual-Band WiFi (2.4GHz and 5.8 GHz)
  • Has four antenna cables
  • Default configuration: 6FT cables to SMA (for LTE & GPS) and RP-SMA (for WiFi)
  • Optional configuration in stock: All 4 connectors to U.FL (12-inch cables)
  • The differences between this antenna (AL2G1W1) and AL2W1G1 are the following:
    • AL2G1W1 has the cables attached to the side, so that the antenna can mount flat on a surface (using magnetic-mounting and/or adhesive-mounting) with no need to drill a hole in the mounting surface (AL2W1G1 is the antenna on this page)
    • AL2W1G1 has a mounting stud in the rear, with the cables coming through the stud from the rear of the antenna.
  • For business customers that need to order less than ten samples for testing, please contact Customer Service

Omni-Directional Dual-band MIMO Antenna:

  • Four internal antennas, and has four separate antenna cables; cables terminate with SMA-male connectors for LTE and RP-SMA for WiFi and Bluetooth (we can customize connectors for large orders).
  • We can customize cable-length for large orders.
  • Puck style, permanent mount
  • Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.

Mounting / Installation Options

Compatibility with wireless standards & applications:

  • LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
    • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
    • Global LTE: 2600 MHz band (2.6GHz)
    • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
  • 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
    • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
  • IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m4G / LTE3G / GSM, LoRa. (Compatible because it is vertically polarized).
  • WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
  • The GPS antenna has SAW to filter other signals.
  • The GPS internal antenna has a metal shield on its bottom side as a ground plane
  • Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.

Item

Specifications

GNSS Antenna

Dielectric Antenna (2 Pins)

Frequency Range

1561.098~1602MHz

Polarization

RHCP

Gain

5dBic(Zenith)

V.S.W.R

<1.5

Axial Ratio

3dB

LNA

Gain

28±2dB

Noise Figure

≤1.5dB

V.S.W.R

<2.0

Supply Voltage

3~5V DC

Current Consumption

<20mA

LTE Antenna MIMO

Frequency Range

698~960MHz/1710~2690MHz

V.S.W.R

<3.0

Polarization

Linear

Gain

2.0dBi

Impedance

50Ω

WIFI Antenna

Frequency Range

2400~2483.5MHz/4900~5825MHz

Polarization

Linear

Gain

3dBi

V.S.W.R

<2.0

Impedance

50Ω

Mechanical

Cable

RG174

Connector

SMA/FAKRA or others

Material

ABS

Mounting Method

Adhesive/Magnet

Environmental

Operating Temperature

-40℃~+85℃

Relative Humidity

Up to 95%

Ingress Protection

IP67

Vibration

10 to 55Hz with 1.5mm amplitude 2hours

Environmentally Friendly

ROHS Compliant

UL certification / rating of the flammability of the antenna housing (ABS):

  • Test Method: UL-94
  • The flame class of this ABS material is HB.

Beamwidth: H-Plane: 360-degrees: The two internal omni-directional antennas receive and send signals from 360 degrees all around. 

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

RP-SMA and SMA Connector Characteristics:

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review