SMA male To RP-SMA male Cable: 3.25FT 6.5FT 7.5FT 10FT 20FT Low Loss
- SKU:
- RSm1mSm
- Availability:
- In stock
- Weight:
- 0.19 LBS
Data Alliance
RP-SMA male To SMA male Cables
Antenna cable: RP-SMA Male to SMA Male (for antenna): Double-shielded, low-loss cable:
- See also other length options: Available in many lengths, including: 18 inches, 1m, 2m, 3m, 6m (m=meter).
- One end has an SMA (male) connector and the other end has an RP-SMA (male) connector.
- The length refers to the length of the cable between the connectors (not including the connectors).
- Data Alliance's high-quality soldered terminations of SMA and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
We offer two options of thickness of cable (both are double-shielded, with a black jacket):
- The LMR-100-equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.
- The LMR-200 cable-type has much lower attenuation (signal loss) than LMR-100 and RG58.
- In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
- Double-shielding of both LMR-100 and LMR-200 enables low signal loss. Both are flexible/easily bendable (LMR-100 is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
- See comparison of LMR-100 and LMR-200 attenuation (signal loss).
Compatibility with wireless standards & applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications
- IoT wireless & M2M: Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors .
Our SMA to RP-SMA extension cables range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.
The temperature range for operational use of these cable assemblies are as follows:
- Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
- Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
RP-SMA and SMA Connector Composition: Our SMA and RP-SMA connectors are precision machined and gold-plated for low loss.
- Connector Body: Gold Plated Brass
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
- Precision machined for low loss in ISO 9001 facilities
RoHS 3 and REACH compliant: All of our antenna cables and RF adapters are compliant with RoHS 3 and REACH restrictions on content of lead and other heavy metals and toxins.
RELATED PAGES: