NMO Mount To SMA male Cable: 6FT 8FT 10FT 12FT 14 FT
$12.25
- SKU:
- NMO.375ra8ftSm200
- Availability:
- In stock
- Weight:
- 0.30 LBS
Brand:
Data Alliance
NMO mount to SMA Male Cable:
- One end of the cable has an NMO mount (right-angle type) and the other end has an SMA-male connector
- NMO ring hole size: There is a 3/8" version and a 3/4" version.
- MABO works with a ⅜ inch hole
- MBO works with a ¾ inch hole.
- Customizable for large orders: Cable lengths and connector type are customizable: Contact Customer Service.
- LTE antennas including Multiband LTE
- WiFi & BlueTooth NMO-mount compatible antennas
- 900MHz antennas for LoRaWAN, Helium & any application in the 890-915 MHz frequency band
Key Points:
- MABO (3/8" diameter version) and MBO (3/4" diameter version) are the two different types of through-hole NMO connector.
- NMO is a thru-hole mount type that is optimized for vehicular roof mounting of an NMO type antenna.
Cable is double-shielded, low-loss and very flexible/easily bendable coax with black jacket. The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance. Rated for outdoor use; suitable for interior use.
- This LMR-200 equivalent cable-type is equivalent or better than LMR200: Has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.
- Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
The temperature range for operational use of this 200-series coax and the cable assembly, is: -31 F ~ +203 F (-35 C ~ +95 C)
- Compatibility with wireless standards & applications: Our SMA cables range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them compatible and compliant for all the following applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax: Data and voice applications
- IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors.
- ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and the other toxic materials restricted by RoHS 3 and REACH.
- SMA Connector Characteristics and Details
- SMA male and female diameter:
- SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
- SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).