N Extension Cable: 1FT 2FT 3FT 4FT 6FT 8FT 10FT 12FT. N-male To N-female

$9.99
SKU:
Nm1ftNf400
Brand:

Availability:
In stock
Weight:
0.15 LBS
Antenna Cable: N-male To N-female connector: 1 FT coaxial assembly
Write a Review

N-Type Extension Cable: N-male To N-female

Antenna Cable: N-type male connector on one end and an N-female connector on the other end.

  • Related cables: Longer N-extension cables and N-male to N-male cables.
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with N male and N-female interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

CABLE-TYPE (COAX) OPTIONS:

  • The 1-foot version on this page is made with LMR-400-equivalent coax.
  • 2-foot through 12-foot versions are made with LMR-200-equivalent coax.
  • If you need another coax option, or another length option, please contact Customer Service.
  • LMR-200 coaxial cable-type has much lower attenuation (signal loss) than LMR-100 and RG58.
  • LMR-400-coaxial cable-type has much lower attenuation (signal loss) than LMR-200.
  • In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
  • Double-shielding of both LMR-200 and LMR-400 enables low signal loss. Both are flexible/easily bendable (LMR-200 is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.

N extension cable Differences in attenuation LMR-100 LMR-200 LMR-400

The temperature range for operational use of these 200-series and 400-series cable assemblies is as follows: -31 F ~ +203 F (-35 C ~ +95 C)

Ideal for Wireless Use Cases:
Thanks to a frequency range from 0GHz to 18GHz, low VSWR, and 50 Ohm impedance, our N-type cables deliver excellent performance for the following:

RoHS and REACH compliant: Our antenna cables and adapters comply with RoHS 3 and REACH restrictions on heavy metals and other toxins.

N-female Connector Characteristics and Details:

  • The N-female-bulkhead connector has a rubber O-ring, which provides a water-tight seal when installed in an enclosure port.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.  
    • Our standard nickel-plated connectors can resist for 70 hours without any corrosion defect in a salt spray test.
    • In a salt-spray test, we can customize our connectors to resist up to 120 hours. Contact Customer Service.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details.
  • N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N-type connectors' materials composition: Weatherproof nickel plating

N materials composition:

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

RELATED PRODUCTS