Antenna 4G LTE GPS Combo Dual Band 698-960/1710-2700MHz Puck 2.5dBi w/ cables to SMA-male

$15.12
SKU:
ALGP2c2m
Brand:

Weight:
0.32 LBS
Minimum Purchase:
10 units

Antenna 4G LTE GPS Combo

A two-cable multiband antenna that provides coverage for two different wireless devices: LTE and GPS :

Omni-Directional Dual-band MIMO Antenna:

See a version of this antenna that includes LTE-AUX connector / cable + GPS (has three antenna cables)

See version of this antenna that is LTE only (has one antenna cable).

Mounting / Installation Options: Magnet & Adhesive

Compatibility with wireless standards & applications:

  • LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
    • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
    • Global LTE: 2600 MHz band (2.6GHz)
    • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
  • 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
    • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
  • IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, LoRa. (Compatible because it is vertically polarized).
  • WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
  • Ideal for 4G/ 3G applications where no ground plane or metal surface is available. Mechanically robust design suitable for both indoor and outdoor applications with wide bandwidth and a low angle radiation pattern that is superior to traditional gain antennas in most applications.
  • The GPS antenna has SAW to filter other signals.
  • The GPS internal antenna has a metal shield on its bottom side as a ground plane

Active / Passive GPS functionality:

  • If the connected device supplies power to the antenna, then it operates as Active.  
  • If the connected device supplies does not provide power to the antenna, then it operates as passive. 
  • These antennas are customizable with regard to active/passive GPS.  Having said that:  The ones that we supply to you have the characteristics of the above two bullet points.

This omni directional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Beamwidth: H-Plane: 360-degrees: The omni dipole antenna receives and sends signals from 360 degrees all around it.

Specifications

Item

Specifications






GPS Antenna



Dielectric
Antenna

Center Frequency

1575.42±3MHz

Band Width

CF±5MHz

Polarization

RHCP

Gain

2dBic ( Zenith )

V.S.W.R

< 1.5

Impedance

50Ω

Axial Ratio

3dB ( max )



LNA

Gain

28±2dB

Noise Figure

< 1.5dB

V.S.W.R

< 2.0

Supply Voltage

2.2~5V DC

Current Consumption

5~15mA



LTE Antenna

Frequency Range

698~960MHz/1710~2690MHz

V.S.W.R

< 3.0

Polarization

Linear

Gain

2.0dBi

Impedance

50Ω



Mechanical

Cable

LMR-100double-shielded low loss

Connector

SMA male (others by special order)

Material

ABS

Mounting Method

Adhesive/Magnet




Environmental

Operating Temperature

-40 ℃ ~+85 ℃

Relative Humidity

Up to 95%

Ingress Protection

IP67

Vibration

10 to 55Hz with 1.5mm amplitude 2hours

Environmentally Friendly

ROHS Compliant

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

UL certification / rating of the flammability of the antenna housing (ABS):

  • Test Method: UL-94
  • The flame class of this ABS material is HB.

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

SMA Connector Characteristics:

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review