N-male To RP-SMA-female: 10-inch, 24-inch Cable for Antenna

$4.17
SKU:
Nm10iRSf100
Brand:

Availability:
In stock
Weight:
0.05 LBS

N-male To RP-SMA-female

Antenna Cable / Adapter with RP-SMA female connector on one end and an N-male connector on the other end.

  • We stock many more RP-SMA to N-type cable and adapter options
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with RP-SMA male and N-male interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of Type-N and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

The two lengths come in different thicknesses of coaxial cable: Both are double-shielded, both are rated for outdoor use and are also suitable for indoor use.

  • 10-inch version is LMR-100-equivalent cable-type: Equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness: Very flexible/easily bendable
  • 2FT version is LMR-200: has much lower attenuation (signal loss) than LMR-100 and RG58. Flexible and bendable.
  • Double-shielding of both LMR-100 and LMR-200 enables low signal loss. Both are flexible/easily bendable (LMR-100 is more flexible/bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance.
  • See comparison of LMR-100 and LMR-200 attenuation (signal loss).
  • Both coaxial cable types have a black jacket.

Coax options for Type-N to RP-SMA-female cables:  LMR-100 compared to LMR-200 and RG-58

The temperature range for operational use of these cable assemblies are as follows:

  • Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
  • Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
RP-SMA Female Version Options RP-SMA Elongated
The version of the RP-SMA female connector on the left has an embedded o-ring, together with a wider flange, for more secure protection against intrusion of water and/or dust and dirt. It is available for some cable versions on this page, and others by special order. The longer RP-SMA-female version (top in photo) has a 14.5mm threaded section. It is available for some cable versions on this page, and others by special order.

 

RP-SMA Female Connector Characteristics and Details

N-male Connector Characteristics and Details: Durable, weatherproof connection

  • The N-male-bulkhead connector has an internal rubber O-ring, which provides a water-tight seal.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz. Being rated up to 12.5GHz, makes them usable in not just WiFi applications, but also in the higher end of the microwave spectrum.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details. Gender refers to the pin inside and not the threads.
  • N-Type connector is the largest of the RF connector types, and are usually found on large antennas , especially for outdoor use.

    Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition:

  • Connector Body: Nickel-Plated Brass
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Compatibility with wireless applications:

Our RP-SMA to N-type cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the above applications.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

RELATED PRODUCTS

Write a Review