TNC-female to MMCX Cable: 18-inch. Double-Shielded Outdoor / Indoor

MMCX-right angle (male) to TNC-female (bulkhead) Cable

This cable has a TNC female connector on one end and an MMCX-male right angle connector on the other end.

• The length refers to the length of the cable between the connectors (not including the connectors).
• Allows interconnection of devices with an MMCX jack and TNC-male interfaces: Antennas, antenna cables and wireless devices.
• Use for Coaxial extension, coaxial interface conversion, coax retrofit applications
• Data Alliance's high-quality soldered terminations of TNC and MMCX connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of this antenna cable coax translates into lower loss/better performance. Coax is rated for outdoor use and is also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm). Impedance is 50 Ohms .

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

Compatible wireless applications: This antenna cable's range of frequency band compatibility (from 0 to 18GHz) consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications.
• IoT, automation & Machine To Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.

MMCX Male Right-Angle Connector:

The small size of MMCX connectors makes them an excellent fit in Internet of Things (IoT) applications since they take up very little space in the cramped cases of small devices, such as Bluetooth beacons.

• Features a lock-snap mechanism which makes it possible to rotate 360 degrees
• Designed to terminate with RF coax cable types including 1.13 coax, RG174, RG-316, RG188, or equivalent coaxial cables
• Impedance: 50 ohms
• Many GPS modules have MMCX jacks. Also miniPCI wireless cards.

MMCX Connectors' Materials Composition

• Connector Body: Gold-Plated Brass
• Center Contact: Phosphor Bronze, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE, Teflon

TNC is a round screw-type connector, with nickel-plated brass.

• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating-alloy for corrosion-resistance.
• Gold plated center contact for reduced signal loss.
• TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector.
• TNC's screw-down connector performs better than BNC in the microwave spectrum.
• High quality connectors, precision machined in ISO 9001 facilities.
• Gender of TNC and N connectors is counter-intuitive: Click for details.

This antenna cable's range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

ROHS & REACH compliant: All of our antenna cables and adapters are in compliance regarding content of toxic materials restricted by RoHS 3 and REACH.