RP-TNC Extension Cable: Male To Female: 3.25FT, 6FT, 10FT, 16FT, 25FT

EXTENSION CABLE: RP-TNC Male To RP-TNC Female Extender Antenna Cable

We offer two options of thickness of cable (both are double-shielded, with a black jacket): All of our RP-TNC cables are are rated for outdoor use and are also suitable for indoor use.

• The 100-series coaxial cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna cable translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. Recommended tightest continuous bend radius is 1.1 inch (28mm).
• The 200-series coaxial cable type is equivalent to LMR200: It has much lower attenuation (signal loss) than LMR-100 and RG58. Has the same or better signal-loss-per-meter and flexibility as LMR-200.
• See comparison of attenuation of 100-series and 200-series coax types (signal loss).
• The double-shielding is a major factor in the higher quality of our cables: It translates into lower loss/better performance.
• Data Alliance's high-quality soldered terminations of RP-TNC connectors provide a low-loss connection with discontinuities kept to a minimum.

The temperature range for operational use of these cable assemblies are as follows:

• Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
• Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

RP-TNC female connector includes a bulkhead nut and washer:

• This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection), or mount the connector on a case, panel or Printed Circuit Bard (PCB).
• Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.

RP-TNC is a round screw-type connector, with nickel-plated brass.

• Nickel-plated brass is the best plating-alloy for corrosion-resistance.
• RP-TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. RP-TNC's screw-down connector performs better than BNC in the microwave spectrum.
• RP=Reverse Polarity. Gender of RP-TNC is counter-intuitive:

Compatibility with wireless applications:

Our antenna cables offer exceptional compatibility with various wireless applications. With a frequency band range from 0GHz to 18GHz, low broadband VSWR, and 50 Ohm impedance matching, they are ideal for all WiFi standards, including 2.4GHz and 8GHz applications like Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A,. They also support cellular wireless LTE / 4G, GSM / 3G, and WiMax for both data and voice applications. Additionally, our cables are perfect for IoT wireless, automation, and Machine to Machine (M2M) applications such as Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E.

ROHS & REACH compliant: All of our antenna cables and adapters are in compliance regarding content of toxic materials restricted by RoHS 3 and REACH.

Directory of other RP-TNC cable types

RP-TNC male to female extension cable is easy and quick to install: The RP-TNC male connector fits the jack on wireless routers, and the RP-TNC female connector fits the male connector on antennas with an RP-TNC male connector: Most wireless antennas with an RP-TNC connector have a male connector. The extension cable enables placing the antenna further from the router, in the most suitable place for line of sight.

COMPATIBILITY: RP-TNC male connector fits older LinkSys & Cisco wireless routers, as well as other items that have a RP-TNC jack/connector.

Compatible Products: