RP-SMA male To RP-SMA male Cable: 30-inch, 3-FT, 4-FT, 5FT, 8FT

$4.19
SKU:
RSm30iRSm100
Brand:

Availability:
In stock
Weight:
0.15 LBS

RP-SMA male To RP-SMA male Cable

Antenna cable: RP-SMA Male to RP-SMA Male: Both ends have a RP-SMA male connector.

  • We carry many other lengths of RP-SMA male to RP-SMA-male cables.
  • Rated for outdoor use and suitable for indoor applications.
  • For coaxial extension, coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

We offer two options of thickness of the antenna cable: Both are rated for outdoor use and are also suitable for indoor use. Both versions are double-shielded, low-loss and very flexible/easily bendable coax with black jacket. The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance. Both versions are suitable and compliant for all types of wireless antennas, including WiFi & WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, ISM, GSM, LTE, as well as any other frequency between 0 and 18GHz.

  1. The LMR-100 equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.
  2. The LMR-200 equivalent cable-type is equivalent or better than LMR200: Has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.

Characteristics of LMR-100 and LMR200

The temperature range for operational use of these cable assemblies are as follows:

  • Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
  • Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

Compatibility with wireless applications:

This antenna cable's range of frequency band compatibility (from 0 to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm antennas and cables, makes them suitable and compliant for all the above applications.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

RP-SMA Connector Characteristics and Details

Torque ratings of SMA-Male cable

  • RP-SMA Gender Determination: Key Points
    • The gender is referring to the pins inside-not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.

RELATED PRODUCTS

Write a Review