N-male To RP-SMA male Cable: 22-inch, 24-inch (2-FT), 30-inch. Outdoor / Indoor Double-Shielded

$4.90
SKU:
Nm22iRSm100
Brand:

Availability:
In stock
Weight:
0.21 LBS

N-male To RP-SMA male Cable

Antenna Cable with RP-SMA connector on one end and an N-male connector on the other end.

  • We stock many more RP-SMA-male to N-male cable options
  • This cable is rated for outdoor use and is also suitable for indoor use.
  • See our mounts for antennas with N-female connectors.
  • The length refers to the length of the cable between the connectors (not including the connectors).
  • Allows interconnection of devices with RP-SMA female and N-female interfaces: Antennas, antenna cables and wireless devices.
  • For coaxial extension (for better antenna positioning), coaxial interface conversion, coax retrofit applications.
  • Data Alliance's high-quality soldered terminations of RP-SMA and Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Compatibility with wireless applications: Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the following applications:

Cable is double-shielded for low signal-loss, and is very flexible/easily bendable. Coaxial cable type is similar to LMR-100 but better quality than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The double-shielding is a major factor in the higher quality of this cable, translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness.

Comparison between LMR100 vs RG-174 coaxial type cables.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

Compatibility with wireless applications: Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear, makes them compatible and compliant for all the following applications:

  • All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
  • Cellular Wireless LTE / 4G, GSM / 3G WiMAX, 5G: Data and voice applications
  • IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.

N-male Connector Characteristics and Details: Durable, weatherproof connection

  • The N-male connector has an interior rubber O-ring, which provides a water-tight seal.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • The N-male connector is knurled.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive: Click here for details.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition:

RP-SMA Connector Characteristics and Details

  • RP-SMA Gender Determination: Key Points
    • RP-SMA gender is counter-intuitive: Please observe picture & note it is correct.
    • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
    • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
    • More details regarding RP-SMA gender determination.

 

Materials-composition-N-Type-Male

 

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

RELATED PRODUCTS

Write a Review

1 Review

  • 5
    Great product

    Posted by Jim on 25th May 2017

    Product was exactly as described, packaged in individual sealed plastic bags. Excellent product so far.