Antenna 2.4GHz 9dBi Omni-Mesh Outdoor w/ N-f. Marine Proof. Mount option

Omni-Mesh Outdoor Antenna

Omni directional dipole antenna: Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it.

Mount Options: 

• See our mount options for antennas with an N-connector (Type-N connector)
• AOA2409TF:  The best L-mount for this antenna is MTLAMO3N because this is a fragile mount, and the threaded section of this antenna is short).  Attach the antenna to the mount by screwing on the N-male connector of your antenna cable at the bottom of the mount.  

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its very low broadband VSWR at < 2.0 (lower VSWR is better), and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

• IoT wireless and M2M: Bluetooth, ZigBee, Wi-Fi HaLow and I.S.M. Since it is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications.
• 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B, 802.11AH.
• Compatible with Bluetooth devices, Wireless Access Points & other wireless devices.
• As Bluetooth antenna: Send or receive signal to devices in all directions (360-degree horizontal beamwidth )
• As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case.

Features & Applications

• As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth )
• As client antenna: Connect to an access point in any direction
• Capable of extending your wireless range up to 300 meters.

Features:

• Low V.S.W.R. / Low Loss Design
• High Efficiency and Sensitivity
• Low Loss RF Coaxial Connector Cable Feed
• Matching Free Design
  • This only includes mounting hardware if you choose the T.F.L. mount option above. We have various other suitable mount options (for antennas with an N-female connector).
  • See also our complete mounts & brackets options.
• Suitable for boat / marine environment

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type Connector Characteristics and Details: Durable, weatherproof connection

• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive.
• N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.
• N materials composition :
  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

COMPATIBLE MOUNTS - for Fiberglass Antennas 

RELATED PRODUCT & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMax

All of our antennas pass the QC test before we ship them.