N-male to N-male: 1FT 18-inch 2FT 3FT 6.5FT 10FT 20FT Outdoor Indoor

N-male to N-male Cables

Antenna Cable: N-type male connector on both ends

• Cable options are shallow signal-loss double-shielded for outdoor or indoor.
• On this page, you'll find various meticulously measured cable options, including 1-foot, 18-inch, 2-foot, 3 FT, 6.5 FT, or 10-foot options, designed to cater to your needs. We carry many other length options of N-male to N-male cables and N-extension cables.
• The length refers to the cable size between the connectors (not including the connectors).
• Rest assured, this cable is rated for outdoor use and perfectly suitable for indoor use, making it a versatile solution for your antenna needs.
• See our mounts for antennas with N-female connectors.
• The length refers to the cable size between the connectors (not including the connectors).
• Allows interconnection of devices with N female interfaces: Antennas, antenna cables, and wireless devices.
• For coaxial extension (for better antenna positioning), coaxial interface conversion, and coax retrofit applications.

With Data Alliance's high-quality soldered terminations of Type-N connectors, you can be confident in its low-loss connection, ensuring minimal discontinuities and optimal performance. We offer three options of the thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:

• 400-series coaxial cable type (equivalent to LMR-400) has much lower attenuation (signal loss) than 200-series.
• 200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
• Our 100-series coaxial cable type is equivalent to or better than LMR-100. It has the same signal-loss-per-meter and flexibility as LMR100 and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. The cable is equivalent to LMR-100 in thickness. This cable is ideal for [specific_use_case_1].100, 200 & 400 -series are rated for outdoor use and suitable for indoor use.
• The double-shielding of 100-series, 200-series, and 400-series cables enables low signal loss. Both are flexible and easily bendable (the 200-series is more flexible and bendable). Double-shielding is a significant factor in the higher quality of this cable, which translates into lower loss and better performance.
• Both coax options have a black PVC jacket.

The temperature range for the operational use of these cable assemblies is as follows:

• Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
• Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
• Cables with 400-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

N-Type Male Connector Materials Composition:

• The materials composition is oriented to ensure a durable, weatherproof connection
  • Connector Body: Nickel-Plated Brass:  The most corrosion-resistant plated brass alloys (better than gold-plated) for long-term outdoor exposure.
  • Our standard nickel-plated connectors: The standard is that the connector can resist a 70-hour salt spray test without any corrosion defects.
  • For corrosion resistance of 120 hours in a salt spray test, we have to customize the connector. There is no tooling cost, but it adds four weeks to delivery time, and the product cost will be 20% higher than the standard cable assembly.
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plate
• Insulators: PTFE
• The N-male connector has an internal rubber O-ring. When connected to an N-female connector with a rubber O-ring (at an enclosure port), it provides a water-tight seal rated IP-67 (based on use with Data Alliance’s N-female connectors with a rubber O-ring).
• The N (male) connector is knurled.
• N-male inside diameter is 0.620-inch (1.57 cm)

Frequency Bands & Electrical Characteristics

• This antenna cable’s rated range of frequency band compatibility is from 900GHz to 6GHz)
• Impedance Matching: 50 Ohms
• Capacitance: Approximately 24.5 pF/ft (80.3 pF/m)
• Attenuation (signal loss):
• At 900 MHz:  0.33 dB/m. (0.09 dB/ft.)
• At 2400 MHz:  LMR-200 = 0.54 dB/m. (0.12 dB/ft.)
• At 3500 MHz:  LMR-200 = 0.67 dB/m. (0.21 dB/ft.)
• At 5800 MHz:  LMR-200: 0.87 dB/m. (0.264 dB/ft.)

Compatibility with Wireless Standards & Applications

Our N-Type cables are designed to be compatible with a broad range of wireless applications. They support frequency bands from 0GHz to 18GHz, maintain low broadband VSWR, and match 50 Ohm impedance, making them suitable for all WiFi standards, including 2.4GHz and 8GHz applications like Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A. They are also compatible with cellular wireless LTE / 4G, GSM / 3G, and WiMax for data and voice applications. Our cables are ideal for IoT wireless, automation, and Machine to Machine (M2M) applications such as Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E.

N-Type Male Connector Dimensions & Other Characteristics

• N-male inside diameter is 0.620 inches (1.57 cm).
• N-connector gender is counter-intuitive: Click here for details.  Gender refers to the pin inside and not the threads.
• N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

RoHS 3 and REACH compliant: Our antenna cables and RF adapters comply with RoHS 3 and REACH restrictions for lead content and other heavy metals and toxins.

• Conflict Minerals Compliance:  This antenna cable complies with Conflict Minerals RMI CMRT 6.31.