MMCX-female to N-male Adapter

N-type male To MMCX female Adapter

RF Adapter: N-type male To N-type female:   It enables connection of an N-female connector  to an MMCX-male connector.

• Nickel-plated brass body for enhanced corrosion resistance: This is the most weather-resistant, corrosion-resistant plating.
• Allows interconnection of devices with N male interfaces: Antennas, antenna cables and wireless devices.
• Use for Coaxial extension, c oaxial interface conversion, coax retrofit applications
• Gold plated center contact for reduced signal loss.
• Suitable for outdoor or indoor applications.

Compatibility with Wireless Applications: These antenna cable adapters' range of frequency band compatibility (from 0 to 18GHz) and 50 Ohms impedance matching, makes them suitable and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMax, 5G: Data and voice applications
• IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.

MMCX Female Connector:

• Center Contact: Phosphor Bronze, Gold Plated
• Connector Body: Brass, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE
• Precision machined for low loss.

N is the largest of RF connector types, and very common to see on large antennas (most large antennas have an N-female connector).

• N-type connectors are usually rated up to 12.5GHz, making them usable in not just WiFi applications, but also in the higher end of the microwave spectrum. Both versions' impedance = 50 Ohms.
• N-Female diameter is 0.620-inch (1.57 cm)
• Our N-type connectors are rated up to 12.5GHz, making them usable in not just Wi-Fi applications, but also in the higher end of the microwave spectrum.

Adapter materials composition:

• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Center Contact: Beryllium Copper, Gold Plated for low signal loss
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

RoHS and REACH compliant: All of our antenna cables and RF adapters are from of heavy metals and compliant with RoHS and REACH.

GENDER DETERMINATION: GENDER of N is counter-intuitive:

Please observe picture & note it is correct.
The gender is referring to the coaxial-cable pins on the inside-not to the threads.

• N female has threads on outside.
• N male has threads on inside.