Antenna Wi-Fi Dual Band Omni 6dBi Weatherproof Outdoor. N-Male
- SKU:
- ADO6Nm
- Availability:
- In stock
- Weight:
- 0.35 LBS
Data Alliance
Weatherproof Antenna: WiFi Dual-Band 4dBi / 6dBi - Omni
- 2400-2485 / 5150-5250 / 5725-5850 MHz
- Also suitable for indoor use
- N-male connector: Nickel-plated brass for corrosion protection
- High performance 2.4 GHz and 5150-5250 / 5725-5825MHz: Provides broad coverage for WLAN System
WiFi Dipole Dual Band WiFi Omni antenna. Its 360-degree omnidirectional capability makes it excellent for use in low—and high-elevation areas. It is convenient and easy to use, as it connects directly to the device's N-female jack.
Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the WiFi dual-band frequency band ranges, its low broadband VSWR, and its impedance matching to 50 Ohm gear make it suitable and compliant for all the following applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A, 802.11AH.
- IoT wireless & M2M: Bluetooth and ZigBee. Since Bluetooth is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications.
Beamwidth: H-Plane: 360 degrees: The Omni dipole antenna receives and sends signals from 360 degrees all around it. It will also send wireless/WiFi signals low and high enough to reach two levels of the building from a location in or adjacent to the building.
This omnidirectional antenna's range of frequency band compatibility in the WiFi Dual Band frequency bands, its low broadband VSWR, and impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.
Mount Options: See our mount options for antennas with an N-connector (Type-N connector)
| SPECIFICATIONS | |
| Frequencies | 2400-2483 / 5150-5250 / 5725-5825MHz |
| Gain | 5 dBi in 2.4 GHz band. 6 dBi in 5GHz bands |
| VSWR | ≤2.0 |
| Maximum Input Power | 5 Watts |
| Impedance | 50 Ohm |
| Polarization | Vertical |
| Connector | N-Type Male. Nickel-plated: max corrosion protection |
| Radome Material | ABS |
| Dimensions | 22 x 192 mm |
| Weight | 75g |
| Operating Temperature | -40℃ to+70℃ |
| ROHS 3 & REACH | Antenna and connector are compliant |
TEST RESULTS for FREQUENCY RANGES:
The antenna demonstrates stable and consistent performance within the evaluated range of approximately 2.30 to 2.80 GHz, showing uniform behavior throughout the frequency sweep. At the central measurement point (≈ 2.51 GHz), an impedance of 24.29 + j0.58 Ω was obtained, with a minimal reactive component, reflecting a controlled condition and proper operation within the analyzed band. The S11 parameter shows a return loss close to −9.3 dB and an SWR of approximately 2:1, indicating a stable response with a moderate level of reflection.
| Frequency range | Assessment | Rating | Technical performance details |
|---|---|---|---|
| 2.30–2.80 GHz | Stable Performance | ★★★★ | Evaluated RF performance across the extended 2.3–2.8 GHz band, showing consistent impedance behavior and controlled reflection levels. At the central measurement point around 2.51 GHz, the measured impedance is 24.29 + j0.58 Ω, indicating a controlled slightly inductive condition. The Return Loss is approximately −9.3 dB with a VSWR close to 2:1, corresponding to an estimated reflected power of about 12–13%. The best matching condition is observed between 2.55–2.60 GHz, where minimum reflection occurs, confirming stable and predictable antenna behavior within the evaluated frequency range. |
N-type male Connector Characteristics and Details: Durable, weatherproof connection
- N is nickel-plated brass, which is the best metal composition for rust-proofing/corrosion-proofing / weatherproofing for long-term outdoor exposure.
- Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
- N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
- N-connector gender is counter-intuitive.
- N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
- Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.
- N materials composition:
- Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
- With our waterproof N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
- Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-male cable.
N-male connector
CLOSELY RELATED ANTENNA VERSIONS
COMPATIBLE L-BRACKET MOUNT:
RELATED PRODUCTS & PAGES:
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
All of our antennas pass the QC test before we ship them.