Antenna Wi-Fi Dual Band Omni 6dBi Weatherproof Outdoor. N-Male


In stock
0.35 LBS
Write a Review

Weatherproof Antenna: WiFi Dual-Band 4dBi / 6dBi - Omni

  • 2400-2485 / 5150-5250 / 5725-5850 MHz
  • Also suitable for indoor use
  • N-male connector:  Nickel-plated brass for corrosion protection
  • High performance 2.4 GHz and 5150-5250 / 5725-5825MHz:  Provides broad coverage for WLAN System

WiFi Dipole Dual Band WiFi Omni antenna. Its 360-degree omnidirectional capability makes it excellent for use in low—and high-elevation areas. It is convenient and easy to use, as it connects directly to the device's N-female jack.

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the WiFi dual-band frequency band ranges, its low broadband VSWR, and its impedance matching to 50 Ohm gear make it suitable and compliant for all the following applications:

Beamwidth: H-Plane: 360 degrees: The Omni dipole antenna receives and sends signals from 360 degrees all around it. It will also send wireless/WiFi signals low and high enough to reach two levels of the building from a location in or adjacent to the building.

This omnidirectional antenna's range of frequency band compatibility in the WiFi Dual Band frequency bands, its low broadband VSWR, and impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Frequencies 2400-2483 / 5150-5250 / 5725-5825MHz
Gain 5 dBi in 2.4 GHz band.  6 dBi in 5GHz bands
VSWR ≤2.0
Maximum Input Power 5 Watts
Impedance 50 Ohm
Polarization Vertical
Connector N-Type Male. Nickel-plated: max corrosion protection
Radome Material ABS
Dimensions 22 x 192 mm
Weight 75g
Operating Temperature -40℃ to+70℃
ROHS 3 & REACH Antenna and connector are compliant


N-type male Connector Characteristics and Details: Durable, weatherproof connection

  • N is nickel-plated brass, which is the best metal composition for rust-proofing/corrosion-proofing / weatherproofing for long-term outdoor exposure.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.
  • N materials composition:
  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Mount Options:

  • With our waterproof N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
  • Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-male cable.





All of our antennas pass the QC test before we ship them.