Antenna LTEx2 Combo Puck Vehicle-Mount 2 Cables to RP-SMA or SMA

Two antennas in one: LTE / 4G Antenna with LTE /4G Backup Antenna: Both have their own cables to SMA connectors (customizable).

Compatibility with wireless standards & applications:

• LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
  • GSM is 3G wireless (Global System for Mobile Communication)
  • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
  • Global LTE: 2600 MHz band (2.6GHz)
  • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
• 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
  
  • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
• IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM,LoRa. (Compatible because it is vertically polarized).
• WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)

Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.

This omni directional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

A two-cable multiband antenna that provides coverage for two different LTE devices.

• We have a smaller version of this antenna
• For business customers that need to order less than ten samples for testing, please contact Customer Service

Omni-Directional Dual-band MIMO Antenna

• 4G/LTE & GPS Combo: Has LTE connections: Two separate antenna cables for LTE : Both cables terminate with SMA-male connectors or RP-SMA connectors (we can customize connectors for large orders).
• Operates simultaneously in the 698-960 MHz and 1710-2700 MHz bands, + GPS.
• Dualband 4GLTE antenna, puck style, permanent mount
• Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.
• See version of this antenna that includes LTE-AUX connector / cable + GPS (has three antenna cables ).
• See version of this antenna that is LTE only (has one antenna cable)

Mounting / Installation Options: Through-hole Mount also called Screw Mount.

• Can be mounted on:
  • Can mount on a fender, or other vertical object.
  • Wall or side an enclosure.
  • If mounted on a locked enclosure, it cannot be removed by vandal / thief because the nut for the screw-mount is on the inside.

Data Alliance's high-quality soldered terminations of RP-SMA and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Specifications

UL certification / rating of the flammability of the antenna housing (ABS):

• Test Method: UL-94
• The flame class of this ABS material is HB.

Beamwidth: H-Plane: 360-degrees: The omni dipole antenna receives and sends signals from 360 degrees all around it.

Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).

SMA Connector Characteristics:

• SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. SMA male has threads on inside. More details regarding SMA gender determination.
• SMA-male is also called "plug" and the respective female connectors are also called a "jack."
• SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
• SMA-male connector fits items that have an SMA (female) jack/connector.
• We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
• SMA male connector composition:
• 96% brass-copper alloy
• Less than 4% lead content (ROHS Compliant)
• 0.1% Chromium VI compound
• 0.01% (by weight) Cadmium / cadmium compounds
• 0.1% Mercury
• 0.1% PBBs
• 0.1% PBDEs

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
• RP-SMA Cables, Antennas and Connectors
• RP-SMA Cables, Antennas & Connectors

All of our antennas pass QC test before we ship them.