Antenna 9dBi omni 2.4GHz w/ N-male. Dipole "Rubber Duck"

Omni-Directional Antenna w/ N-male Connector

9dBi omni-directional dipole antenna for WiFi N-male connector.

• Articulating right angle: Can be straight or right-angle at base.
• Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it
• As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth).
• As client antenna:Connect to an access point in any direction
• Designed for wireless 802.11n, 802.11g, 802.11b devices: WiFi / Wireless networking
• Capable of extending your wireless range of up to 650 m (2,132ft).
• Suitable for outdoor Access Point / Router with N-type connector
• Frequency range: 2.4 - 2.5 GHz
• Length when fully extended: 15.8 inches (388mm)
• Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Compatibility with wireless standards & applications: This omni directional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its its excellent low broadband VSWR at < 1.6, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

• IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications.
• 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B.

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

N-type male Connector Characteristics and Details: Durable, weatherproof connection

• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• N-Female diameter is 0.620-inch (1.57 cm) . N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive .
• N-Type connectors are the largest of the RF connector types , and are usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition:

• Connector Body: Nickel-Plated Brass : The most corrosion-resistant of all plated brass alloys (better than gold-plated).
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

Mounting Options:

• With our waterproof N male connector they can be easily mounted to an L-mount (for wall or pole-mounting) or enclosure to give total wireless coverage.
• Mount on our L-mount options by inserting the N-female connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut and washer on the N-female cable.
• Magnetic base option: With an 18-inch cable to RP-SMA-male connector: The heavy magnetic-base can hold the antenna upright in wind or on a moving vehicle.
• Mount Option: Compatible magnetic mount with N-female connector and cable to RP-SMA-male

Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
• N-Type Cables and Connectors
• N-Type Female Antennas
• N-Type Male Antennas

All of our antennas pass QC test before we ship them.