Antenna 4G LTE Dual Band 698-960/1710-2700MHz Omnidirectional 3dBi w/ Cable to SMA


In stock
0.42 LBS
Write a Review

Omni-Directional Multi-Band Antenna

Omni-Directional Multi-band Antenna operates simultaneously in the 698-960 MHz and 1710-2700 MHz bands.

Ideal for 4G/3G applications where no ground plane or metal surface is available. Mechanically robust design suitable for both indoor and outdoor applications with wide bandwidth and a low angle radiation pattern that is superior to traditional gain antennas in most - NMO Antenna Mounta

  • Through-hole mountable (such as through vehicle roof)
  • Various cable length options to SMA-male
  • The cable-type is very low loss LMR-200-equivalent (is equivalent or better than LMR200): It has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.
  • Other Connector Options:
  • - NMO Antenna MountsThrough-Hole Mount Diameter Options: NMO through-hole mounts have two diameter options: 3/8-inch and 3/4-inch diameter: For the NMO side of the antenna cable: We use the 0.375" (3/8") diameter NMO version by default. If you need the 0.75" (3/4") diameter version: You can buy the cable on this page, or contact Customer Service and we will modify your order accordingly.
  • See 900MHz versions of this antenna, f or 902-928 MHz band: Version with cable to SMA and Version with N-female connector

Compatibility with wireless standards & applications:

This omni directional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Mounting / Installation: Through-hole Mount (NMO style through-hole mount), Wall mount, Fender Mount. Can be mounted on the roof, ceiling or surface of a vehicle or an enclosure.


Frequency range: 698-960/1710-2700 MHz
Impedance: 50 Ohm
VSWR: <2.5
Gain: 0-3dBi
Radiation: Omnidirectional
Polarization: Vertical
Lighting protection: Direct ground
Maximum power input-watt: 30W
  • Height: 90mm (3.54 inch)
  • Diameter: Ø39.5mm (1.56 inch)
Housing material: ABS. The flame class of this ABS material is HB.
Test Method: UL-94

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

N-type female Connector Characteristics and Details:

  • Durable, weatherproof connection
  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-Type connectors are the largest of the RF connector types , and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.

N materials composition

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Marine antenna: This antenna can be used for marine use, but in a salt-water environment, the antenna often will begin to corrode after a year or possibly less: The chrome plating on the base bubbles and peels off: Our customers that use this antenna for marine use , find that the low cost and fact that it lasts about a year without any issue, in a marine environment, makes it suitable: The antenna is is cost-effective enough even considering that they replace the antenna when the corrosion begins.

LoRaWAN | Long-Range IoT ANTENNAS 4.9-6.0GHz



All of our antennas pass QC test before we ship them.

Customer Q&A and Comments