Antenna 2.4GHz 8dBi Omni-Directional Waterproof Fiberglass N-male


Will be in stock by Feb 15
0.60 LBS
Write a Review

Antenna Omni-Directional Waterproof Fiberglass

Weatherproof Mesh 8dBi 2.4GHz Omni directional antenna, constructed of U.V. resistant materials, is weatherproof/waterproof for a long service life.  Twenty-one inches / 53cm.  Diameter:  3/4"

This antenna'V.S.W.R.low V.S.W.R. indicates a very efficient, high-performance antenna. Lower VSWR is better.

Mounting Options:

  • Mount on our L-mount options by inserting the N-female connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-female cable (See photos above)
  • Other mount options
  • Magnetic mount option: Compatible magnetic mount with N-female connector and cable to RP-SMA-male
  • MTFiber is one of the mount/base options that you can combine with this antenna on this page:  
    • The U-bolt set of MTFiber Inner diameter: 2 1/8" Outer diameter: 2 "
    • This U-bolts set will accommodate a mast diameter of up to 2 1/8"
    • A typical J-mount /mast diameter is 1 5/8”. The mount's U-bolts will accommodate a 1 5/8" mast with no problem (there is no compatibility issue—it will fit the mast).
    • The photos on this page show the A2O7Nm mounted on a mast:  The mast in the picture has a diameter of 1 5/8"

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its excellent low broadband VSWR at < 1.6, and impedance matching to 50 Ohm gear makes it suitable and compliant for all the following applications:




Model Freq. (MHz) Gain Vert BW Weight Dimension (L x Dia)
A2O8Nm 2400-2485 8dbi 18 deg 0.3 kg
540 x 15mm
Parameter Min Typ Max Units
VSWR 1:5:1
Impedance 50 Ohm
Input Power 10 W
Rated Wind Velocity 125 (56) mph (m/sec)
Operating Temperature -40 +70 Deg C

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

COMPATIBLE MOUNTS - for Fiberglass Antennas 




Rest assured, all our antennas undergo a rigorous Quality Control test before they are shipped, ensuring their reliability and performance.

Customer Q&A and Comments