Antenna 12dBi Omni 2.4GHz w/ N-male connector

Articulating right angle: Can be straight or right-angle at the base.
Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it.
As an access point antenna, it signals clients in any direction (360-degree horizontal beamwidth).
As client antenna: Connect to an access point in any direction.
Designed for wireless 802.11n, 802.11g, 802.11b devices: WiFi / Wireless networking.
Capable of extending your wireless range of up to 650 m (2,132ft).
Suitable for outdoor Access Points / Routers with N-type connectors.
Frequency range: 2.4 - 2.5 GHz
Length when fully extended: 23 inches (584mm)
Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with minimal discontinuities.
- Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its excellent low broadband VSWR at < 1.6, and impedance matching to 50 Ohm gear makes it suitable and compliant for all the following applications:

IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications.
2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B

TECHNICAL SPECIFICATIONS:

Frequency range	2400 ~ 2500MHZ
Gain (dBi)	12dBi
Impedance	50 Ohms
VSWR	<=1.5
Polarization	Linear Vertical
HPBW / horizontal	360 degrees
Antenna Connector	N-MALE
Temperature	Operating: -40c ~+65c \| Storage: -40c ~+80c
Radome color	Black
Radome material	Fiberglass
Dimensions	Length 23 inches (fully extended)

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type male Connector Characteristics and Details: Durable, weatherproof connection

Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
N-connector gender is counter-intuitive.
N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.
N materials composition :
- Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE

With our waterproof N male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
Mount on our L-mount options by inserting the N-female connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-female cable.
Magnetic base option: With an 18-inch cable to RP-SMA-male connector, the heavy magnetic base can hold the antenna upright in wind or on a moving vehicle.
Mount Option: Compatible magnetic mount with N-female connector and cable to RP-SMA-male

COMPATIBLE MOUNTS - for Fiberglass Antennas

RELATED PRODUCTS & PAGES:

All of our antennas pass the QC test before we ship them.

Antenna 12dBi Omni 2.4GHz w/ N-male connector. Dipole "Rubber Duck"