900 ~ 1800MHz Omnidirectional Antenna w/ N-Male Connector

$5.99
SKU:
A9D2Nm
Brand:

Weight:
0.10 LBS

Suitable for the following wireless standards & applications

This omni directional antenna's range of frequency band compatibility in the 900 MHz to 1800 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Features & applications

  • As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
  • As client antenna: Connect to an access point in any direction
  • Capable of extending your wireless range up to 300 meters.
  • Suitable for indoor wireless gear with N-Male connector.

SPECIFICATIONS:

Frequency Range: 900/1800MHz
VSWR: ≤ 2.0
Impedance: 50Ω ± 5Ω
Forward Gain: 2dBi
Polarization: Vertical
Power Handling: 1Watt
Beamwidth: H:360° / E:23.3°/46°
Connector: N Male
Operation Temp: -30°C ~ +60°C
Material: Radome: TPU
Base: ABS
Dimension (L*W*H): φ20*147.9 mm
Weight: 18g ± 2g
Color: Black

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

N-type male Connector Characteristics and Details:  Durable, weatherproof connection

  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
  • N materials composition:
    • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated). 
    • Center Contact: Beryllium Copper, Gold Plated
    • Crimp Ferrule: Copper, Nickel Plated
    • Insulators: PTFE
  • Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. The articulating (bendable) right-angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are therefore recommendable for indoor use or protected outdoors, i.e. under an eave. If you need a weatherproof dipole antenna, you should choose either a straight dipole or one with a fixed right angle. See our weatherproof antennas.
  • Mount Options: Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut and washer on the N-male cable.With our waterproof N male connector they can be easily mounted to an L-mount (for wall or pole-mounting) or enclosure to give total wireless coverage.

Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review