SMA male To SMA male Right-Angle Cable: 6FT 8FT 10FT 12FT

SMA male To SMA male Right-Angle Cable

Antenna Cable: SMA Male To SMA Male right-angle double-shielded for low signal loss

• Both ends have an SMA-male connector, with one being right-angled and the other being straight
• See shorter versions of this cable: SMA-male right angle to SMA-male straight
• See all cables with SMA connectors with right-angle
• See other SMA-male to SMA-male cables: Both ends have an SMA (male) connector.
• See also: SMA cables index page
• Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
• For coaxial extension, coaxial interface conversion, coax retrofit applications

The cable is double-shielded, low-loss, and very flexible/easily bendable coax with a black jacket. The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss/better performance. Rated for outdoor use; suitable for interior use. This LMR-200 equivalent cable-type is equivalent or better than LMR200: Has the same or better signal-loss-per-meter and flexibility as LMR200, and less attenuation (signal loss) than RG58.

The temperature range for operational use of this 200-series coax and the cable assembly, is: -31 F ~ +203 F (-35 C ~ +95 C)

Compatibility with wireless standards & applications:

Broad Wireless Compatibility: Our SMA extension cables support a wide frequency range (0GHz to 18GHz), maintain low broadband VSWR, and are precisely matched to 50 Ohm impedance—ensuring full compatibility with a wide range of wireless systems:

• WiFi standards: Including 2.4GHz and 8GHz bands—Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A.
• Cellular networks: LTE / 4G, GSM / 3G, and WiMax for both data and voice
• IoT & M2M applications: Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E.

Helium miners in Europe: Fully compatible with Bobcat miners, Sensecap miners, and all Helium LongFi devices—just like all our SMA-male connector antenna cables and adapters.

ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and the other toxic materials restricted by RoHS 3 and REACH.

SMA Connector Characteristics and Details

• SMA male and female diameter:
  • SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
  • SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).

SMA-male has a pin inside the connector body

• SMA Gender Determination: Key Point
  • SMA gender is counter-intuitive: Please observe picture & note it is correct.
  • The gender is referring to the pins inside-not the threads. SMA male has threads on inside.

• SMA Connector Materials Composition
• SMA Characteristics and Key Information

Related Products

• SMA Adapters
• SMA Extension Cables Male-Female