SMA male To SMA male Cable: 3 inch, 4-in, 6-in, 8-in, 10-in, 12-in, 14-in, 16-inch

$2.90
SKU:
Sm3iSm
Brand:

Weight:
0.03 LBS

Antenna Cable: SMA male to male cable: Low-loss cable. Both ends have an SMA (male) connector

See other lengths of SMA Male to male cables

Compatibility with wireless applications: Our SMA cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them compatible and compliant for all the following applications: 

Cable is double-shielded, low-loss and very flexible/easily bendable. Coaxial cable type is similar to LMR-100 but better quality than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The double-shielding is a major factor in the higher quality of this cable, translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use.

ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and the other toxic materials restricted by RoHS 3 and REACH.

SMA Connector Characteristics and Details

  • SMA male and female diameter:
    • SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
    • SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).
  • SMA Gender Determination: Key Point
    • SMA gender is counter-intuitive: Please observe picture & note it is correct.  
    • The gender is referring to the pins inside-not the threads. SMA male has threads on inside.
  • SMA-Connector Materials Composition
    • Connector Body: Gold Plated Brass
    • Center Contact: Beryllium Copper, Gold Plated
    • Crimp Ferrule: Copper, Nickel Plated
    • Insulators: PTFE
    • Precision machined for low loss in ISO 9001 facilities
  • Other SMA Characteristics and Key Points
    • SMA-male is also called "plug" and SMA female connector is also called "jack"
    • We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
    • SMA-female connector fits items that have an SMA-male connector.
    • SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
    • SMA connectors are not compatible with the common, commercially available Type F coaxial connector. Type F connectors look similar but are of slightly different size and will not pair with SMA or RP-SMA connectors without an adapter.

Related Products:

Write a Review

1 Review

  • 5
    Delivered as Promised

    Posted by Ibiaso Ormsley Adajames on 22nd Nov 2017

    The Product is what was ordered and quality great