SMA-female Panel-Mount Jack to SMA-male Cable | 12 inch
- SKU:
- Sm12iSfP
- Availability:
- In stock
- Weight:
- 0.05 LBS
Data Alliance
SMA-female Panel-Mount Jack Cable
SMA Panel-Mount Jack Characteristics
The SMA-female panel-mount jack has a four-hole square mounting flange, for a rigid mechanical installation on the exterior of a case, device or enclosure.
The SMA-female end is specifically designed for secure panel mounting. Unlike a conventional inline SMA connector, the jack incorporates a four-hole square flange that can be fastened directly to a chassis, enclosure wall, equipment panel, or mounting plate.
The flange measures approximately 12.7 × 12.7 mm and uses four 2.6 mm diameter mounting holes. The mounting-hole centers are approximately 8.65 mm apart horizontally and vertically.
This four-point mounting arrangement provides excellent mechanical stability and helps prevent rotation or movement of the connector when antennas or RF cables are repeatedly connected and disconnected.
The opposite end is terminated with a standard straight SMA-male connector, making the assembly convenient for connecting an internal radio, modem, RF module, PCB-mounted interface, or other SMA-female RF port to the panel-mounted external connection.
We can customize this cable assembly as-needed for large orders.
Low-Loss 100-Series Coaxial Cable
The assembly uses compact 100-series low-loss coaxial cable, suitable for applications where both low RF attenuation and a relatively small cable diameter are important. This cable class provides an excellent compromise between flexibility, space efficiency, and signal-loss performance for short internal RF connections. This coax is double-shielded, low-loss, and very flexible/easily bendable. In fact, its quality is equivalent to or better than LMR100. Coax with a black jacket has the same or better signal loss per meter and flexibility as LMR100 and less attenuation (signal loss) than RG174 and RG178. This superior quality translates into lower loss and better performance, giving you the confidence that you're using the best cable for your antenna. The cable is equivalent to LMR-100 in thickness.
The temperature range for operational use of this 100-series coax and the cable assembly is: -22 F ~ +185 F (-30 C ~ +85 C)
Compatibility:
Our high-performance SMA extension cables ensure seamless integration with wireless technologies, thanks to their 0GHz–18GHz frequency support, low VSWR, and 50 Ohm impedance compatibility. These features make them suitable for all WiFi bands at 2.4GHz and 8GHz, supporting Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A. They also work flawlessly with LTE / 4G, GSM / 3G, and WiMax cellular networks for both data and voice. Whether it's IoT connectivity or M2M applications, our cables meet the demands of Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E. They're also fully compatible with European Helium miners, including Bobcat miners, Sensecap miners, and other Helium LongFi models—as are all our SMA-male antenna cables and adapters.
ROHS & REACH compliant: The entire product (connectors and cable) is free of heavy metals and compliant with ROHS and REACH.
SMA-male has a pin inside the connector body
- SMA-female connector fits items that have an SMA (female) jack/connector.
- SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. SMA male has threads on inside.
- SMA female connector is also called "jack" and SMA-male is also called "plug."
- SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
- We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
- Data Alliance's high-quality soldered terminations of SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
RELATED PRODUCTS