N-male To N-male Cable: 16.5FT, 25FT, 50FT, 100FT, 150FT Double-Shielded Outdoor Indoor

N-male To N-male Cable

Antenna Cable: N-type male connector on both ends

• Cable options with very low signal-loss
• We carry many other length options of N-male to N-male cables and N-extension cables.
• The length refers to the cable size between the connectors (not including the connectors).
• This cable is rated for outdoor use and is also suitable for indoor use.
• See our mounts for antennas with N-female connectors.
• The length refers to the cable size between the connectors (not including the connectors).
• Allows interconnection of devices with N female interfaces: Antennas, antenna cables, and wireless devices.
• For coaxial extension (for better antenna positioning), coaxial interface conversion, and coax retrofit applications.

Rest assured, our antenna cables are equipped with high-quality soldered terminations of Type-N connectors. This ensures a low-loss connection with minimal discontinuities, guaranteeing the durability and performance you need.

We offer two options of the thickness of cable (both are double-shielded for low signal loss: 400 series and 200-series:

• Opt for our 400-series coaxial cable type (equivalent to LMR-400) for superior performance. It boasts much lower attenuation (signal loss) than the 200-series, ensuring a stronger and more reliable signal.200-series coaxial cable-type (equivalent to LMR-200) has much lower attenuation (signal loss) than LMR-100 and RG58.
• Both 200 & 400 -series are rated for outdoor use and are also suitable for indoor use.
• Double-shielding of both 200-series and 400-series enables low signal loss. Both are flexible and easily bendable (the 200-series is more flexible and bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss and better performance.
• Both coax options have a black PVC jacket.

Frequency Bands & Wireless Standards & Applications Compatibility

• This antenna cable’s rated range of frequency band compatibility is from 900GHz to 6GHz)

Broad Wireless Compatibility:
Our Type-N cables support a wide frequency range (0GHz to 18GHz), maintain low broadband VSWR, and are precisely matched to 50 Ohm impedance—ensuring full compatibility with a wide range of wireless systems:

• WiFi standards: Including 2.4GHz and 8GHz bands—Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A.
• Cellular networks: LTE / 4G, GSM / 3G, and WiMax for both data and voice
• IoT & M2M applications: Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E.

RoHS and REACH compliant: Our antenna cables and adapters comply with RoHS 3 and REACH restrictions on heavy metals and other toxins.

The temperature range for operational use of these 200-series and 400-series cable assemblies is as follows: -31 F ~ +203 F (-35 C ~ +95 C)

N-Type Male Connector Materials Composition:

• The N-male connector has an internal rubber O-ring. When connected to an N-female connector with a rubber O-ring (at an enclosure port), it provides a water-tight seal rated IP-67 (based on use with Data Alliance’s N-female connectors with a rubber O-ring).
• The N (male) connector is knurled.
• N-male inside diameter is 0.620-inch (1.57 cm)
• Connector Body: Nickel-Plated Brass:  The most corrosion-resistant plated brass alloys (better than gold-plated) for long-term outdoor exposure.
• Connector Body: Nickel-Plated Brass:  The most corrosion-resistant plated brass alloys (better than gold-plated). 
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plate
• Insulators: PTFE
• The materials composition is oriented to ensure a durable, weatherproof connection

N-male Connector:  Dimensions & Other Characteristics

• N-male inside diameter is 0.620 inches (1.57 cm).
• N-connector gender is counter-intuitive: Click here for details.  Gender refers to the pin inside and not the threads.
• N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.