Directional Yagi Antenna 900MHz 12dBi LoRaWAN Helium
$42.99
- SKU:
- DAYA9012
- Availability:
- In stock
- Weight:
- 3.00 LBS
Brand:
Data Alliance
Directional Yagi Antenna 900MHz 12dBi LoRaWAN Helium
900MHz ISM Band Directional Yagi Antenna 12 dBi with Weatherproof Applications:
- Directional Yagi design radiates signal pattern in the direction in which antenna is pointed: See radiation pattern in the images. Directional antennas have less interference than omni-directional antennas because they focus signal in a single direction, thereby eliminating much of the signal noise.
- For LoRa / LoraWAN, Helium LongFi, GSM, ZigBee, and any other wireless protocol that uses a frequency in the 850-920MHz band.
- See all 900MHz Antenna options: LoRa, Helium, LoRaWAN, GSM, 3G options
- Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
- Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
Mount Options: See our mount options for antennas with an N-connector (Type-N connector)
Compatibility with wireless standards & applications:
- LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
- Compatible with Helium Network miners / devices , as are all antennas in our Helium Antennas subcategory
- Helium accessory items directory: Antennas, cables & mounts for range-extension of Helium miners (including Bobcat miner) and LoRaWAN access points.
- LoRa / LoRaWAN.
- 900MHzISM Band . Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands .
- Non Line of Sight (NLOS ): 900 MHz band is best for passing through trees and forests.
- IoT wireless & M2M : Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m , 4G / LTE , 3G / GSM . (Compatible because it is vertically polarized ).
This directional Yagi antenna's range of frequency band compatibility in the 824 MHz to 960 MHz frequency band range, its very low broadband VSWR at 1.6, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.
Antenna Specifications:
| Frequency Range | 824~960MHz |
| Gain | 12dBi |
| VSWR | ≤ 1.5 |
| Horizontal Beamwidth | 36° |
| Vertical Beamwidth | 32° |
| Impedance | 50Ω |
| Maximum Input Power | 50W |
| Connector | N Female |
| Wind Survival | 135 MPH |
| Dimension | 1100 x 180 mm (43 x 7 in) |
| Mounting Mast Diameter | 30⌀ ~50⌀ |
| Weight | 1.4kg (3lbs) |
| Operating Temperature | 40°C~80°C |
N-type female Connector Characteristics and Details: Durable, weatherproof connection
- Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
- Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
- N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
- N-connector gender is counter-intuitive.
- N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
- Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
N materials composition:
- Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated).
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
All of our antennas pass QC test before we ship them.
