Antenna 5dBi 5.8GHz Omni-Directional Adhesive Mount w/Cable to RP-SMA or SMA
- In stock
- 0.22 LBS
Outdoor / Indoor 5dBi Omni-Directional Adhesive-Mount Dual Band WiFi Antenna with Adhesive Mount
- With 5FT cable to RP-SMA or SMA connector options
- 5.8 GHZ Frequency Band
- V.S.W.R. < 1.8 : Low V.S.W.R. that is indicative of a very high-quality, high performance antenna.
- IP65 ingress-protection rating: Weatherproof / waterproof
- Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it.
- Marine antenna: This antenna can be used for marine use, but in a salt-water environment, the antenna often will begin to corrode after a year or possibly less: The chrome plating on the base bubbles and peels off: Our customers that us this antenna for marine use, find that the low cost and fact that it lasts about a year without any issue, in a marine environment, makes it suitable: The antenna is is cost-effective enough even considering that they replace the antenna when the corrosion begins.
- Adhesive Mount Antennas
- Data Alliance's high-quality soldered terminations of RP-SMA and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Compatibility with wireless standards & applications: This omni directional antenna's range of frequency band compatibility in the 5.8GHz frequency band, its low broadband VSWR at < 1.8, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all 5.8GHz frequency applications, including, 802.11AC
- As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
- As client antenna: Connect to an access point in any direction
- Capable of extending your wireless range up to 300 meters.
- Adhesive Mount is included for wall or pole mounting.
- Suitable for outdoor or indoor wireless gear with RP-SMA-female or SMA-female connector.
|Frequency range||5.8GHz frequency band|
|VSWR|| <1.8 : Low VSWR indicative of high performance
|HPBW / horizontal||360 degrees (horiz. pol. beamwidth)|
|HPBW / vertical||25 degrees (vertical pol. beamwidth)|
|Max Power handling||50W|
|Antenna Cable|| RG-174 coax cable to RP-SMA or RP-SMA connector
|Antenna Connector||RP-SMA-male & SMA-male options|
|Survival wind speed||180Km/hr|
|Temperature||-40C ~+ 60C|
|Radome material||Hard plastic|
|Dimensions||Inches: L 4.5 X W 7/8 X 1/8|
ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.
Cable Length: 5 foot. Custom cable lengths and alternative connector types can be supplied for volume requirements.
RP-SMA and SMA Connector Characteristics:
- RP-SMA = Reverse Polarity SMA. Also known as SMA-RP, SMA-R, SMA RP, SMA R.
- RP-SMA and SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. RP-SMA male have threads on the inside. More details regarding RP-SMA gender determination.
- RP-SMA-male and SMA is also called "plug" and the respective female connectors are also called a "jack."
- RP-SMA and SMA are round screw-type connectors, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
- Connector Body: Brass, Gold Plated for low loss. Precision-machined.
- Center Contact: Beryllium Copper, Gold Plated
- Crimp Ferrule: Copper, Nickel Plated
- Insulators: PTFE
- We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
- SMA-male connector fits items that have an SMA (female) jack/connector.
RELATED PRODUCTS & PAGES:
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMax
- RP-SMA Cables, Antennas and Connectors
- SMA Cables & Adapters
All of our antennas pass QC test before we ship them.