Antenna 5G 824~960/1710~2170MHz 2dBi SMA / RP-SMA Connector
- Availability:
- In stock
- Weight:
- 0.10 LBS
Data Alliance
Antenna 824~960/1710~2170MHz 2dBi SMA / RP-SMA Connector
Outdoor / Indoor 2dBi 824~960/1710~2170MHz antenna with Adhesive Mount
- With 5-meter cable to RP-SMA or SMA connector options
- IP65ingress-protection rating: Weatherproof /waterproof
- Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it.
- Marine antenna: This antenna can be used for marine use, but in a salt-water environment, the antenna often will begin to corrode after a year or possibly less: The chrome plating on the base bubbles and peels off: Our customers that us this antenna for marine use, find that the low cost and fact that it lasts about a year without any issue, in a marine environment, makes it suitable: The antenna is is cost-effective enough even considering that they replace the antenna when the corrosion begins.
- Data Alliance's high-quality soldered terminations of RP-SMA and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
- Adhesive Mount Antennas: Supplied with a 3M strong adhesive base strong adhesive, enabling simple installation. This antenna is perfect for quick and simple installations onto surface materials such as metal, glass, wood and plastic.
This antenna is designed for reliable performance across a range of wireless standards:
- IoT wireless & M2M Applications: Fully supports Bluetooth,ZigBee, Wi-Fi Halow and ISM
- bands. Its vertical polarization makes it well-suited for machine-to-machine (M2M) communication, telemetry and remote monitoring use cases.
- 2.4GHz Standards: Compatible with 802.11N, 802.11G, 802.11B, 802.11AH protocols.
Thanks to its tuned frequency band range of 2.4 to 2.5GHz and impedance matching to standard 50 Ohm systems, this antenna is both suitable and compliant for all the applications listed above.
FEATURES
- As client antenna: Connect to an access point in any direction
- Adhesive Mounts included for wall or pole mounting.
- As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
- Capable of extending your wireless range up to 300 meters.
- Suitable for outdoor or indoor wireless gear with RP-SMA-female or SMA-female connector.
|
Item |
Specifications |
|
|
Antenna |
824~960/1710~2170MHz |
|
|
Linear |
||
|
2.0dBi （ Zenith ） |
||
|
＜ 3.0 |
||
|
50 Ω |
||
|
PCB Dimension |
104.6*18*1mm (4.1 x .71 x .04 in) |
|
|
Mechanical |
100-Series / 5-meter cable |
|
|
Radome Material |
ABS | |
|
Environmental |
Operating Temperature |
-40 ℃ ~+85 ℃ |
|
Relative Humidity |
Up to 95% |
|
|
Vibration |
10 to 55Hz with 1.5mm amplitude 2hours |
|
|
Environmentally |
Friendly ROHS Compliant |
|
TEST RESULTS for FREQUENCY RANGES:
The antenna was evaluated over the approximate frequency range of 860 to 960 MHz, showing stable behavior within the analyzed band. At the measurement point near 960 MHz, the recorded impedance is 34.38 − j0.98 Ω, indicating a slightly mismatched condition relative to the nominal 50 Ω value, with a small capacitive component.
| Frequency range | Assessment | Rating | Technical performance details |
|---|---|---|---|
| 860–960 MHz | Very good | ★★★★ | RF performance evaluated across the 860–960 MHz band, showing stable impedance behavior with moderate reflection levels throughout the frequency sweep. At 960 MHz, the measured VSWR is approximately 1.97:1 with a Return Loss close to −9.7 dB, indicating moderate impedance matching near the upper edge of the band. At 860 MHz, the VSWR is approximately 1.46:1 with a Return Loss of about −14.6 dB, demonstrating improved matching and lower reflected power at the lower portion of the band. The measured impedance near the reference point is 34.38 − j0.98 Ω, indicating a slightly lower resistive component relative to the nominal 50 Ω system impedance with a minimal capacitive reactance. The Smith chart trajectory shows a controlled impedance variation around the central region of the chart, confirming stable RF behavior across the evaluated frequency range. |
RP-SMA and SMA Connector Characteristics:
- SMA-male connector fits items that have an SMA (female) jack/connector.
- RP SMA and SMA Connector Materials Composition
- RP SMA and SMA Characteristics and Key Information
- We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
RELATED PRODUCTS & PAGES:
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
- RP-SMA Cables, Antennas and Connectors
- SMA Cables, Antennas & Connectors
All of our antennas pass QC test before we ship them.