Antenna 4G LTE Omni-Directional 4/5dBi IP67 w/ N-Female or N-Male


In stock
0.55 LBS

LTE / 4G spectrum Omni-Directional Dipole 4G Dual-Band, Waterproof / weatherproof Antenna for outdoor use:  .

Compatibility with wireless standards & applications:

This omni directional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

 Frequency Range  698-960 MHz
 1710-2700 MHz
 Gain  4/5 dBi
 V.S.W.R  <1.5
 Radiation  Omni Direction
 Horizontal BeamWidth  360
 Vertical Beam Width  35
 Polarization  Vertical
 Maximum Input Power  100W
 Impedance  50 Ohm
 Connector  N Female or N-Male
 Antenna Material  Fiberglass
 Mount Type  Pole
 Diameter of Installation Pole  Ø30-Ø50mm
 Dimensions  Ø20x320mm
 Weight  250g
 Operating Temperature  -40 - 70
 Rated Wind Velocity  60m/s


N-type female Connector Characteristics and Details: Durable, weatherproof connection.

  • N is nickel-plated brass, which is the best metals composition for rust-proof / corrosion proof / weatherproofing for long-term outdoor exposure. 
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620-inch (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-Type connectors are the largest of the RF connector types, and are usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
  • N materials composition:
    • Connector Body: Nickel-Plated Brass: The most corrosion-resistant of all plated brass alloys (better than gold-plated). 
    • Center Contact: Beryllium Copper, Gold Plated
    • Crimp Ferrule: Copper, Nickel Plated
    • Insulators: PTFE

All of our antennas pass QC test before we ship them

Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RoHS and REACH compliant: Content of lead, other heavy metals and toxins are in compliance with RoHS 3 and REACH.

Write a Review