Antenna 4G 5G LTE 9dBi MultiBand 617~7125 MHz Omni w/ N-female

Operates simultaneously in all of these frequency bands:

617~960 MHz: 3dBi	1710~2690 MHz: 4dBi	3300~4200 MHz: 8dBi
4400~5000 MHz: 9dBi	5150~5850 MHz: 8dBi	5925~7125 MHz: 9dBi

Mounting / Installation Options:

• A through-hole mount is done through the roof of a vehicle or on an enclosure.
  • See our wide selection of mounts for antennas with N-female connectors, including wall and pole mounts. L-bracket mounts:
    • It can be mounted on a wall, side of an enclosure, fender, or other vertical object.
    • If mounted in a locked enclosure, it cannot be removed by a vandal or thief because the nut for the N-female connector is on the inside.
• NMO mounts with a cable to SMA: This antenna has an NMO interface at the base, which enables many more mounting options: Through-hole mount, Magnetic mount, trunk mount, and cable with connector.

Connector options: Flexible:

• N-female connector: The antenna version on this page has an N-female connector.
• SMA-female: See a version of this antenna with an SMA-female connector and a through-hole mount
• NMO interface: If you need an NMO through-hole mount and will connect this antenna to an SMA-female connector, these cables to SMA-male connector (various length options) have an NMO interface that fits this antenna's NMO interface.
• Other connector and cable options: This antenna's NMO interface enables us to easily connect a cable to any connector type. For large orders, we can customize a solution that includes a discount.

It is ideal for 4G/3G applications without a ground plane or metal surface. Mechanically robust design is suitable for indoor and outdoor applications with wide bandwidth and a low-angle radiation pattern superior to traditional gain antennas in most applications.

Compatibility with wireless standards & applications:

• • LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networksGSM is 3G wireless (Global System for Mobile Communication)
  • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
  • Global LTE: 2600 MHz band (2.6GHz)
  • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
• 900MHz ISM Band. It can also operate on other VHF and UHF frequencies within the ISM frequency bands.
  • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
• IoT wireless & M2M: Compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, and LoRa. (Compatible because it is vertically polarized).
• WiMAX frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)

See also 900MHz versions of this antenna. For the 902-928 MHz band, use the SMA-female version and the N-female connector version.

This omnidirectional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and its impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.

SPECIFICATIONS:

Frequency range:	617~960/1710~2690/3300~4200/4400~5000/5150~5850/5925~7125MHz
Peak Gain:	3dBi@617~960MHz；4dBi@1710~2690MHz；8dBi@3300~4200MHz；9dBi@4400~5000MHz；8dBi@5150~5850MHz；9dBi@5925~7125MHz
Efficiency	45~87%@617~960MHz；64~77%@1710~2690MHz；60~78%@3300~4200MHz; 60~75%@4400~5000MHz；60~71%@5150~5850MHz；70~80%@5925~7125MHz
Impedance:	50 Ohm
VSWR:	<3.0
Polarization:	Vertical
Radiation:	Omnidirectional
Operating Temp	-40 to +85 Celcius
Lighting protection:	Direct ground
Connector	N-female. Antenna has NMO interface, with adapter to N-female
Dimensions:	Height: 84mm (3.31 inch) Diameter: Ø41mm (1.61 inch)
Housing material:	PC+ABS. The flame class of this ABS material is HB.
Weatherproof	IP68 Intrusion Protection

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type female Connector Characteristics and Details:

• Durable, weatherproof connection
• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive.
• N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N materials composition

• Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

Marine antenna: This antenna can be used for marine use, but in a salt-water environment, the antenna often will begin to corrode after a year or possibly less. The chrome plating on the base bubbles and peels off: Our customers that use this antenna for marine use find that the low cost and fact that it lasts about a year without any issue in a marine environment makes it suitable. The antenna is cost-effective enough, even though they replace it when the corrosion begins.

CLOSELY RELATED ANTENNA VERSIONS

COMPATIBLE L-BRACKET MOUNT: 

 

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
• N-Type Cables and Connectors
• N-Type Female Antennas
• N-Type Male Antennas

All of our antennas pass QC test before we ship them.