Antenna 2.4GHz 3dBi Outdoor Omni-Directional Dipole w/N male articulating

$5.50
SKU:
A2D3Nm
Brand:

Availability:
In stock
Weight:
0.09 LBS
Write a Review

1 Review

  • 5
    Nice Fit

    Posted by Unknown on 18th May 2017

    This antenna is being used on a Frsky 2.4ghz QX7 radio controller and works very well.

Antenna Outdoor Omni-Directional Dipole

2.4GHz 3dBi Dipole antenna with N-male connector: 2.4GHz- 2.5GHz Band

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its excellent low broadband VSWR at < 2.0, and its impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

  • With our waterproof N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
  • Mount on our L-mount options by inserting the N-female connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-female cable.
  • Magnetic base option: With an 18-inch cable to RP-SMA male connector, the heavy magnetic base can hold the antenna upright in the wind or on a moving vehicle.
SPECIFICATIONS
Dimensions 148mm length by 20mm diameter
(5.82 x .78 inches)
Weight 36g  (1.3oz)

Housing ABS
Hinge ABS
Color White
Operating Temperature -30°C to +60°C
Storage Temperature -30°C to +60°C
Frequency Range 2400~2500 MHz
V.S.W.R = 2.0
Antenna Type Dipole
Gain 3.0 ± 0.3dBi
Polarization Vertical
Horizontal Beamwidth 360
Impedance 50 Ohm
Connector N-male articulating type
ROHS Compliant with RoHs 3

 

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type male Connector Characteristics and Details: Durable, weatherproof connection

  • Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N materials composition :

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. However, the articulating (bendable) right angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are recommended for indoor use or protection outdoors, i.e., under an eave. If you need a weatherproof dipole antenna, choose a straight dipole or one with a fixed right angle. See our weatherproof antennas.

CLOSELY RELATED ANTENNA VERSIONS

 

COMPATIBLE L-BRACKET MOUNT

 

 

RELATED PRODUCTS & PAGES:

All of our antennas pass the QC test before we ship them.

Customer Q&A and Comments