Wi-Fi Antenna Dual-Band 5dBi 2.4-2.5GHz 4.9-5.9GHz. RP-SMA articulating

$12.99
SKU:
ADD35RAv2
Brand:

Availability:
In stock
Weight:
0.15 LBS
Dual-band 2.4GHz and 5.8GHz dipole antenna: 3dBi in 2.4GHz and 5dBi in 5.8GHz. RP-SMA male has a socket inside the threaded area, rather than a pin there.
Bulk Pricing:
Buy in bulk and save

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 10 - 19 and get 1% off
  • Buy 20 - 39 and get 2% off
  • Buy 40 - 59 and get 3% off
  • Buy 60 - 79 and get 5% off
  • Buy 80 - 99 and get 6% off
  • Buy 100 - 199 and get 7% off
  • Buy 200 - 299 and get 10% off
  • Buy 300 - 499 and get 15% off
  • Buy 500 - 999 and get 20% off
  • Buy 1000 - 1999 and get 22% off
  • Buy 2000 or above and get 25% off
Write a Review

Wi-Fi Dual-Band 5dBi Antenna

Dual-Band 2.4GHz & 5.8GHz Omni-Directional WiFi Antenna with RP-SMA Male Connector

  • Frequency Support: Operates on both 2.4GHz (2400MHz) and 5.8GHz (5800MHz) bands for dual-band WiFi compatibility.

  • Omni-Directional Radiation: Dipole design provides 360° horizontal coverage, transmitting and receiving signals equally in all directions—ideal for multi-level building coverage.

  • Vertical Range: Delivers strong vertical signal propagation to cover multiple floors, reaching both above and below its mounting point.

  • Connector Type: Attaches directly to devices with RP-SMA female or SMA female connectors, such as routers, client adapters, and wireless radios.

  • Adjustable Angle (Right-Angle Version): Features a hinged base that can be positioned at 90 degrees or other angles for optimal alignment and signal strength.

Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks. Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.

Compatibility with wireless standards & applications: This omni directional dual band antenna's range of frequency band compatibility in the 2.4GHz and the 5.8GHz frequencies, its excellent low broadband VSWR at < 1.7, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

SPECIFICATIONS:

Frequencies:
  • 2.4GHz ~ 2.5GHz: Gain: 3dBi
  • 4.9GHz ~ 5.9GHz: Gain: 5dBi
V.S.W.R: <=2
Impedance: 50 ohms
Connector: RP-SMA Male articulating right-angle
Dimensions: L: 220mm x W: 26 (8.7x1.0in)
Weight: 38.6g (1oz)
Operating temperature range: -30 to 60 ° C
Polarization: Vertical
H-Plane: 360 degrees (omni-directional)
E-Plane: 2.4~2.5GHz, 44° / 4.9~5.9GHz, 26°
Max power: 1 Watt
Radome Material: ABS

TEST RESULTS for FREQUENCY RANGES:

report antenna

The antenna exhibits solid and consistent performance in the 2.4 to 2.5 GHz range, maintaining an impedance match close to the nominal 50 Ω system reference throughout the evaluated band.

S11 analysis shows VSWR values approximately between 1.80 and 1.95, indicating an adequate and stable level of impedance matching within the 2.4 GHz ISM spectrum.

Frequency range Assessment Rating Compatible technologies
2.40–2.50 GHz Good   ★★★ Wi-Fi 2.4 GHz (802.11b/g/n), Bluetooth (Classic & BLE), ZigBee, Thread, ISM band IoT devices, wireless sensors and telemetry systems, and embedded RF communication modules operating in the 2.4 GHz band.
Consistent impedance behavior referenced to 50 Ω across the evaluated band. VSWR values range approximately between 1.80 and 1.95, corresponding to a Return Loss between −9.8 dB and −10.9 dB. These values indicate stable RF performance and controlled reflection levels suitable for ISM 2.4 GHz wireless applications.
 

Lead Free & ROHS Complaint: The entire product is ROHS compliant (connector and antenna).

  • SMA and RP SMA Connector Characteristics and Key Information
  • SMA and RP SMA Connector Materials Composition

COMPATIBLE MOUNTS & TECH SUPPORT PAGES

All of our antennas pass QC test before we ship them.

RELATED WiFi Dual Band-2.4GHz-5GHz PRODUCTS

 
s