TNC Female to SMA Male Right Angle Cable 3 inch Adapter

SMA Male Right-Angle TNC Female Cable

• One end has a TNC female connector and the other end has a SMA male right-angle connector.
• The TNC-female connector has a bulkhead with o-ring for weatherproofing, with a nut and washer
• The TNC-female is nickel-plated brass for enhanced weather-resistance and corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

Compatibility with wireless applications:

Our SMA extension cables are compatible with a wide range of wireless applications due to their frequency band compatibility (0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables. They support all WiFi standards, including 2.4GHz and 8GHz applications such as Wi-Fi HaLow 802.11AH, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, and 802.11A. Additionally, they are suitable for cellular wireless LTE / 4G, GSM / 3G, and WiMax for data and voice applications. Our cables also work with IoT wireless, automation, and Machine to Machine (M2M) applications like Bluetooth, ZigBee, WiFi HaLow, RFID, LoRa, LTE-m, and NB-IoT, WiFi 6, WiFi 6E. Furthermore, they are compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners, and other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors.

Antenna Cable Coax is double-shielded, low-loss and very flexible.

• The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174.
• This cable is rated for outdoor use and is also suitable for indoor use.
• The higher quality of the cable of this antenna translates into lower loss/better performance.
• Cable is equivalent to LMR-100 in thickness.
• Recommended tightest bend radius is 1 inch (28mm).

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

ROHS & REACH compliant: All of our antenna cables and adapters are in compliance regarding content of toxic materials restricted by RoHS 3 and REACH.

TNC is a round screw-type connector, with nickel-plated brass.

• Nickel-plated brass is the best plating-alloy for corrosion-resistance.
• TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. TNC's screw-down connector performs better than BNC in the microwave spectrum.

SMA Materials Composition

SMA Dimensions

SMA Characteristics and Key Information

SMA Gender Determination: Key Point

• SMA gender is counter-intuitive: Please observe picture & note it is correct.
• The gender is referring to the pins inside-not the threads. SMA male has threads on inside.

Related Products: