Antenna 4G LTE Omni-Directional 3dBi Outdoor Weatherproof. N-Male or Female

4G LTE Omni-Directional Outdoor Weatherproof Antenna

• Type N-male and Type N-female connector options.
• LTE / 4G spectrum Omni-Directional Dipole 4G Dual-Band, Waterproof / weatherproof Antenna for outdoor use:
• Dual-Band in the LTE / 4G frequencies:  Covers worldwide LTE,4G,3G, and GSM bands, including 700/800/900/1800/2100 and 2700 MHz for LTE, Cellular, GSM, and UMTS (3G) operation.
• Also suitable for LTE-m
• 4G LTE terminal ground plane independent dipole antenna made of sturdy ABS.
• The type-N connector's body is nickel-plated brass, the best plating alloy for corrosion protection in outdoor environments.
• They are designed for fixed and mobile 4G LTE terminal products such as routers, modems, and gateways.
• All versions are waterproof/suitable for outdoor use.  Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it
• As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case
• As access point antenna: Provides signal to clients in all directions (360-degree horizontal beamwidth)

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

 

 

Compatibility with wireless standards & applications:

• • LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networksGSM is 3G wireless (Global System for Mobile Communication)
  • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
  • Global LTE: 2600 MHz band (2.6GHz)
  • GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
• 900MHz ISM Band. It can also operate on other VHF and UHF frequencies within the ISM frequency bands.
  • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
• IoT wireless & M2M: This omnidirectional antenna is not just compatible but also ideally suited for many machine-to-machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, and LoRa. Its compatibility, Especially due to its vertical polarization, opens up exciting possibilities for its use in cutting-edge IoT technology, sparking excitement in the audience.
• WiMAX frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)

This omnidirectional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and its impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.

SPECIFICATIONS
Frequencies	698-960 / 1710-2170 / 2500-2700MHz
Gain	3 dBi
VSWR	≤2.5
Maximum Input Power	5W
Impedance	50 Ohm
Polarization	Vertical
Connector	N-Type Male. Nickel-plated: max corrosion protection
Radome Material	ABS
Dimensions	22x221mm (.87x8.7 in)
Weight	43g (1.5oz)
Operating Temperature	-40℃ to+70℃
ROHS 3 & REACH	Antenna and connector are compliant

N-type male Connector Characteristics and Details: Durable, weatherproof connection

• N is nickel-plated brass, which is the best metal composition for rust-proofing/corrosion-proofing / weatherproofing for long-term outdoor exposure.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive.
• N-Type connectors are the largest RF connector types and are usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

COMPATIBLE L-BRACKET MOUNT: 

 

N materials composition:

• Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

Mount Options:

• With our waterproof N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
• Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-male cable.

CLOSELY RELATED ANTENNA VERSIONS

 

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX

All of our antennas pass the QC test before we ship them.