Antenna LTE 4G 3dBi 698~960/170~2700MHz Omni-Directional SMA & RP-SMA

$3.99
SKU:
ALO3S
Brand:

Availability:
In stock
Weight:
0.20 LBS

Outdoor / Indoor 3dBi Omni-Directional 700 MHz to 2700 MHz Antenna

  • Dual Band / Multi-band in LTE 4G / 3G GSM frequency Bands.
  • IP65 ingress-protection rating: Weatherproof /waterproof.
  • Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it.
  • Marine antenna: This antenna can be used for marine use, but in a salt-water environment, the antenna often will begin to corrode after a year or possibly less: The chrome plating on the base bubbles and peels off: Our customers that us this antenna for marine use, find that the low cost and fact that it lasts about a year without any issue, in a marine environment, makes it suitable: The antenna is is cost-effective enough even considering that they replace the antenna when the corrosion begins.

Compatibility with wireless standards & applications:

This omni directional antenna's range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Features & applications

  • As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth)
  • As client antenna: Connect to an access point in any direction
  • Capable of extending your wireless range up to 300 meters.
  • Suitable for outdoor or indoor wireless gear with RP-SMA-female or SMA-female connector.
  • ROHS & REACH compliant: Heavy metal content and other material content is in compliance with ROHS 3 and REACH (connector and antenna).

Item

Specifications

 


 Antenna

 Center Frequency

 698~960/1710~2690MHz

 Polarization

 Linear

 Gain

 3dBi

 V.S.W.R.

 <3.0

 Impedance

 50Ω

 Connector

 SMA Male


 Environmental

 Operating Temperature

 -40℃~+85℃

 Vibration

 10 to 55Hz with 1.5mm amplitude 2hours

 Environmentally Friendly

 ROHS Compliant

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.


SMA & RP-SMA Connector Characteristics
:

  • RP-SMA = Reverse Polarity SMA. Also known as SMA-RP, SMA-R, SMA RP, SMA R.
  • RP-SMA and SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. RP-SMA male have threads on the inside. More details regarding RP-SMA gender determination
  • RP-SMA-male and SMA are also called "plugs" and the respective female connectors are also called "jacks".
  • RP-SMA and SMA are round screw-type connectors, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.
  • SMA-male connector fits items that have an SMA (female) jack/connector.
  • We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
  • Composition of SMA male and RP-SMA male connectors:
    • 96% brass-copper alloy
    • Less than 4% lead content (ROHS Compliant)
    • 0.1% Chromium VI compound
    • 0.01% (by weight) Cadmium / cadmium compounds
    • 0.1% Mercury
    • 0.1% PBBs
    • 0.1% PBDE
  • Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. The articulating (bendable) right-angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are therefore recommendable for indoor use or protected outdoors, i.e. under an eave. If you need a weatherproof dipole antenna, you should choose either a straight dipole or one with a fixed right angle. See our weatherproof antennas.

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

Write a Review