Antenna Dual Band Directional Weatherproof 2.4GHz 3dBi & 5.1-5.8GHz 5dBi w/Screw Mount. Cable to RP-SMA


In stock
0.20 LBS

  Screw-Mount / "Through-hole mount" on back of antenna 

  • Mount on any panel or board that you can drill a hole through, such as a ceiling panel, wall or drywall.  
  • Easily mounts in a ceiling tile, by drilling a hold in the tile of the same diameter. Antenna has a nut and washer to mount the antenna on a ceiling mount.
  • Mount on ceiling or wall panel so that the antenna faces down from the ceiling, or horizontally from the wall. 
  • Can be mounted securely inside or outside, with its 22mm long screw thread.
  • Diameter of through-hole mount: 11/16 inch (17mm) including outer part of threads.

 Waterproof: Totally sealed IP67 casing, with rubber seal gasket to prevent risk of water ingress.

Compatibility with wireless standards & applications: This omni directional dual band antenna's range of frequency band compatibility in the 2.4GHz and the 5.8GHz frequencies, its excellent low broadband VSWR at < 1.7, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications


Frequency: 2400-2500MHz and 5100-5900MHz  (2.4 - 2.5GHz and 5.1 to 5.9GHz)
Gain: 5 dBi in the 5.1 - 5.9GHz band and 3dBi in the 2.4GHz to 2.5GHz band
Color: Black or White
Antenna's Cable: Length 1-FT (30CM). LMR-100A. We can provide w/longer cable: Please contact customer service (for special order).
Connector: RP-SMA-male (we can provide other connector options for bulk orders)
VSWR <= 1.7
Polarization: Linear Vertical
Temperature: -40 to +85 °C
Humidity: 40% to 95%
Waterproof: Totally sealed IP67 casing, with rubber seal gasket to prevent risk of water ingress.
  • Dimensions:
    • Largest diameter: 78mm
    • Smallest diameter of antenna body: 63mm  
    • Depth (or height): 23mm.
    • Diameter of through-hole mount: 11/16 inch (17mm) including outer part of threads.
  • Directional: Radiates and receives signal primarily in the direction in which the antenna is pointed. This helps eliminate signal noise, which enables stronger and better signal quality in the desired direction.
  • ROHS & REACH compliant: Antenna and connector are all compliant with ROHS 3 and REACH.

Vandal prone environments demand tough equipment that will resist excessive force upon them. Commonly used in WiFi applications in demanding environments: Vandal prone areas, outdoors and harsh weather condition locations. Can be used with most modern day WiFi modems such as NetGear and TP-link that operate with 802.11ac.

RP-SMA and SMA Connector Characteristics:


All of our antennas pass QC test before we ship them.

Write a Review