Antenna 4G LTE 5dBi 617-960 / 1695-2700 MHz Weatherproof. N-Male N-female


In stock
0.25 LBS
Write a Review

4G LTE Omni-Directional Outdoor Weatherproof Antenna

  • N-male and N-female connector options.

LTE / 4G spectrum Omni-Directional Dipole 4G Dual-Band, Waterproof / weatherproof Antenna for outdoor use:

  • Multi-Band in the LTE / 4G frequencies: This covers the worldwide LTE,4G,3G, and GSM bands, including 617-698 and 1695-2700 MHz for LTE / Cellular operation.
  • Also suitable for LTE-m
  • 4G LTE terminal ground plane independent dipole antenna made of sturdy ABS.
  • The body of the N-connector (male and female) is nickel-plated brass, the best plating alloy for corrosion protection in outdoor environments.
  • They are designed for fixed and mobile 4G LTE terminal products such as routers, modems, and gateways.
  • All versions are waterproof/suitable for outdoor use.  Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it
    • As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case
    • As access point antenna: Provides signal to clients in all directions (360-degree horizontal beamwidth)

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Compatibility with wireless standards & applications:

  • LTE / 4G: Broadband design for 4G / LTE systems: 4G networks
    • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
    • Band 3:  1710 MHz to 1880 MHz
    • Band 28: 703 MHz to 803 MHz
    • GSM band 1850.2 - 1909.8 (US and Latin America / Mexico)
    • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
  • IoT wireless & M2M: Compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, and LoRa. (Compatible because it is vertically polarized).

This omnidirectional Antenna's range of frequency band compatibility, low broadband VSWR, and impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.

Frequencies 617-960 MHz / 1695-2700 MHz
Gain 617-960 band: 3dBi | 1695-2700 band: 5dBi
VSWR ≤2.5
Maximum Input Power 5W
Impedance 50 Ohm
Polarization Vertical
Connector N-Type Male. Nickel-plated: max corrosion protection
Radome Material TPE
Dimensions 22x180mm 
Weight 70g (1.5oz)
Operating Temperature -40℃ to+70℃
ROHS 3 & REACH  Antenna and connector are compliant

N-type male Connector Characteristics and Details: Durable, weatherproof connection

  • N is nickel-plated brass, which is the best metal composition for rust-proofing/corrosion-proofing / weatherproofing for long-term outdoor exposure.
  • Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
  • N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
  • N-connector gender is counter-intuitive.
  • N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
  • Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N materials composition:

  • Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
  • Center Contact: Beryllium Copper, Gold Plated
  • Crimp Ferrule: Copper, Nickel Plated
  • Insulators: PTFE

Mount Options:

  • With our waterproof N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
  • Mount on our L-mount options by inserting the N-male connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-male cable.





All of our antennas pass the QC test before we ship them.