Antenna 2.4GHz 2.5dBi Directional Patch w/ Adhesive Mount. RP-SMA

$4.50
SKU:
A2P3
Brand:

Availability:
In stock
Weight:
0.10 LBS
"I-Bar" antenna with Adhesive Mount and 5-FT (1.5 meter) cable to RP-SMA (male) connector.
Write a Review

Directional Patch Antenna w/ Adhesive Mount

Dual Band, Directional Patch Antenna "I-Bar"-type, with Adhesive Mount and cable length options to RP-SMA (male) connector.

  • Directional antenna concentrates the radiation in one direction, to maximize signal strength. Adhesive Mount: Supplied with a 3M strong adhesive base strong adhesive, enabling simple installation. This antenna perfect for quick and simple installations onto surface materials such as metal, glass, wood and plastic.
  • The limited beamwidth reduces "signal noise" / interference from other WiFi networks and third-party wireless devices, resulting in much greater performance of the device connected to this antenna (especially as compared to omni-directional antennas, which pickup 360-degrees of signal noise.
  • Directional, direct connect antenna tuned to perform on 2.4GHz networks. Linear polarized, it is suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.

Compatibility with wireless standards & applications: This omni directional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz frequency band range, its its excellent low broadband VSWR at < 1.6, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

SPECIFICATIONS:

Frequency: 2.4GHz ~ 2.484GHz / 2400 MHz to 2483.5MHz
Gain: 2.5dBi (zenith)
Polarization: Linear
V.S.W.R: <=2.0:1
Impedance: 50 Ohms
Connector: RP-SMA Male. Customizable for large orders.
Cable: RG-174: 1-meter. Length & coax-type are customizable for large orders.
Dimensions of the internal PCB: Length: 115mm|4.5in Width: 0.8mm|.03in Height: 9mm|.35in
Operating temperature range: -40 to +85 °C
Relative Humidity: Up to 95%
Vibration: 10 to 55Hz with 1.5mm amplitude 2 hours
Mounting method: Adhesive

TEST RESULTS for FREQUENCY RANGES:

report test

The antenna delivers stable and consistent RF performance across the 2.4 to 2.6 GHz frequency range, maintaining functional impedance matching throughout the entire band. During testing, the VSWR remains approximately between 2.3:1 and 2.6:1, with Return Loss values around –7 to –8 dB, enabling adequate power transfer for practical applications. The behavior observed on the Smith Chart indicates a controlled and predictable impedance response, confirming the stability of the design. Overall, this antenna represents a reliable solution for wireless applications in the 2.4 GHz ISM band, such as WiFi, Bluetooth, Zigbee, and IoT, particularly in commercial and industrial environments where robustness and continuous operation are required.

Frequency range Assessment Rating Compatible technologies
2.40–2.50 GHz Very good  ★★★★ WiFi 2.4 GHz, Bluetooth (Classic/LE), Zigbee, Thread, and 2.4 GHz proprietary IoT links.
SWR: ~2.5:1–2.6:1  |  Return Loss: ~–7.3 to –6.9 dB
2.50–2.60 GHz Very good ★★★★ Upper-band 2.4 GHz channels, Bluetooth, Zigbee/Thread, industrial IoT and telemetry systems.
SWR: ~2.3:1–2.5:1  |  Return Loss: ~–8.0 to –7.3 dB

Antenna, cable and connector are all compliant with ROHS 3 & REACH.

RELATED PRODUCTS & PAGES:

All of our antennas pass QC test before we ship them.

s