SMA male To SMA male Cable: 4FT 5FT 6FT 7FT 8FT 10-Foot 12FT 14FT


In stock
0.20 LBS
Write a Review

SMA male To SMA male Cable

Antenna Cable: SMA Male to SMA Male double-shielded for low signal loss

Other length options of SMA-male to SMA-male cables: Both ends have an SMA (male) connector.

Compatibility with wireless applications: Our SMA cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables makes them compatible and compliant for all the following applications:

We offer two options for the thickness of the cable (both are double-shielded, with a black jacket):

  • The LMR-100-equivalent cable-type is equivalent or better than LMR100: Has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable translates into lower loss/better performance. The cable is equivalent to LMR-100 in thickness.
  • The LMR-200 cable type has much lower attenuation (signal loss) than LMR-100 and RG58.
  • In both cases of coax types, the cables are rated for outdoor use and suitable for indoor use.
  • Double-shielding of both LMR-100 and LMR-200 enables low signal loss. Both are flexible and easily bendable (LMR-100 is more flexible and bendable). Double-shielding is a major factor in the higher quality of this cable, which translates into lower loss and better performance.
  • See comparison of LMR-100 and LMR-200 attenuation (signal loss).
  • Our SMA connectors are of the highest quality, providing a low-loss connection with minimal discontinuities. This is thanks to our high-quality soldered terminations, ensuring superior performance.

Comparison for RG-58, LMR-100 and LMR-200

The temperature range for the operational use of these cable assemblies is as follows:

  • Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
  • Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

All our antenna cables and adapters are ROHS & REACH compliant. This means they are free of lead and other toxic materials restricted by RoHS 3 and REACH, ensuring your health and the environment are protected.

torque ratings SMA-male to SMA-male


SMA Connector Characteristics and Details:

SMA male connector specifications

  • SMA Gender Determination: Key Point
    • SMA gender is counter-intuitive: Please observe the picture & note it is correct.
    • The gender refers to the pins inside the threads. SMA male has threads on the inside.

SMA-male has a pin inside the connector body