RP-SMA female To SMA male Cable: 8-inch 10-in 1FT 15in 18-inch 21in Double-shielded

$3.99
SKU:
RSf8iSm100
Brand:

Availability:
In stock
Weight:
0.05 LBS
SMA male and RP-SMA female both have a pin - because RP-SMA stands for Reverse Polarity SMA.
Write a Review

RP-SMA female To SMA male Cable

Our RP-SMA female to SMA male cable is not your typical antenna or adapter cable. It's a One-of-a-kind solution that marries the convenience of an SMA Male connector with the adaptability of an RP-SMA female connector, all within a double-shielded cable.

  • The length refers to the cable length between the connectors (not including the connectors).
  • One end has an RP-SMA-female connector, and the other has an SMA-male connector with a bulkhead mount (bulkhead nut and washer).
  • See details regarding the RP-SMA female connector below Weatherproofing, mounting, and length options.
  • Data Alliance's high-quality soldered terminations of RP-SMA and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

Our Antenna Cable Coax is not just any cable. It's double-shielded, low-loss, and flexible, ensuring not just performance but also durability. The cable type is equivalent to or better than LMR-100: Coax with black jacket has the same signal-loss-per-meter and flexibility as LMR100 and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. They are rated for outdoor use and are also suitable for indoor use. The recommended tightest bend radius is 1 inch (28mm), demonstrating flexibility and adaptability. Coax is double-shielded, low-loss, and very flexible. The cable type is equivalent to or better than LMR-100: Coax with black jacket has the same signal-loss-per-meter and flexibility as LMR100 and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. They are rated for outdoor use and are also suitable for indoor use. The recommended tightest bend radius is 1 inch (28mm).

rg-174-lmr-100-coaxial-cable-sma-female-rp-sma-male-cable-comparison-8GHz

RP-SMA female connector includes a bulkhead nut and washer:

  • This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection) or mount the connector on a case, panel, or Printed Circuit Board (PCB)
  • Weatherproofing: Seal the hole where the female connector is mounted by placing an O-ring between the enclosure's wall and the bulkhead nut and washer on the female connector.
  • All of our cables with female SMA and RP-SMA female connectors have bulkhead mount hardware.
  • The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches. We have a longer option, 14.5mm, which is available. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
SMA & RP-SMA Gender Determination: Key Points:
  • SMA gender is counter-intuitive.  
  • The gender refers to the pins inside the threads. SMA male has threads on the inside of the connector body and has a pin inside the connector body
  • RP-SMA (reverse polarity) means that the pin and socket configuration is the opposite of what you would expect: RP-SMA female has a pin inside, and RP-SMA male has a socket inside.

SMA and RPSMA male and female connectors compared

Compatibility with wireless standards & applications:

Reliable Connectivity Across Wireless Standards:
With coverage from 0GHz to 18GHz, low broadband VSWR, and 50 Ohm impedance, our SMA extension cables ensure optimal performance and compatibility with:

RoHS 3 and REACH compliant: Our antenna cables and RF adapters comply with RoHS 3 and REACH restrictions on lead content and other heavy metals and toxins.

The temperature range for operational use of this 100-series coax and the cable assembly is -22 F ~ +185 F (-30 C ~ +85 C)

Torque ratings of SMA and RPSMA antenna cable connectors

RELATED PAGES: