MMCX to SMA-male right-angle Cable: 4-inch, 6-in, 8-in, 10-in, 1FT, 14-in

Cable with MMCX right angle and SMA-male right-angle connectors.

• We also have a version with SMA-male straight connector

Compatibility with wireless applications: our MMCX to SMA cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables, makes them compatible and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMAX: Data and voice applications
• IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
• Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors .

Cable is double-shielded for low signal-loss, and is very flexible/easily bendable. Coaxial cable type is similar to LMR-100 but better quality than LMR100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The double-shielding is a major factor in the higher quality of this cable, translates into lower loss/better performance. Cable is equivalent to LMR-100 in thickness. This cable is rated for outdoor use and is also suitable for indoor use.

The temperature range for operational use of this 100-series coax and the cable assembly, is: -22 F ~ +185 F (-30 C ~ +85 C)

SMA Connector Characteristics and Details

• SMA male and female diameter:
• SMA female outside diameter is 5/16" (7.9375mm): Accommodates a hex nut (bulkhead nut) with 5/16" nominal outer diameter
• SMA male inside diameter is 5/16" (7.9375mm) (the inside diameter where the threads are).

• SMA Gender Determination: Key Point
  • SMA gender is counter-intuitive: Please observe picture & note it is correct.
  • The gender is referring to the pins inside--not the threads. SMA male has threads on inside.
  • More details regarding SMA gender determination.

• SMA-Connector Materials Composition:
• Connector Body: Gold Plated Brass
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE
• Precision machined for low loss in ISO 9001 facilities

• Other SMA Characteristics and Key Points
• SMA-male is also called "plug" and SMA female connector is also called "jack".
• We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
• SMA-female connector fits items that have an SMA-male connector.
• SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.

MMCX Male Right-Angle Connector:

• Features a lock-snap mechanism which makes it possible to rotate 360 degrees
• Designed to terminate with RF coax cable types including 1.13 coax, RG174, RG-316, RG188, or equivalent coaxial cables
• Impedance: 50 ohms
• Many GPS modules have MMCX jacks. Also miniPCI wireless cards.

MMCX Connectors' Materials Composition

• Connector Body: Gold-Plated Brass
• Center Contact: Phosphor Bronze, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE, Teflon

ROHS & REACH compliant: All of our antenna cables and adapters are free of lead and the other toxic materials restricted by RoHS 3 and REACH.

Data Alliance's high-quality soldered terminations of MMCX and SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.

RELATED PRODUCTS & INFO:

• MMCX to SMA Cables
• MMCX to N Cables