How To Choose an Antenna Antenna Mounts Antenna Cables Router Enclosures Antenna Cable Adapters Waterproof /Weatherproof antenna connector Top Tips for Long Range WiFi

Tech Support - Top Tips for WiFi and Wireless

    Top Tips for Cellular Signal Improvement: LTE / 4G, GSM / 3G Wireless

    Why do I have a poor cellular signal?

    Diminished cellular connectivity may be due to one or a combination of these common causes:

    [A] Being too far away from a cell-tower. Cell towers are usually spaced at intervals of a few miles with coverage depending on the presence of obstruction extending up to tens of miles. Remote areas are often too far from a cell tower to maintain a decent signal and the erection of a cell tower nearby may not be commercially viable. GSM has a maximum distance for cell tower transmission of 22 miles (35km) but other cellular protocols do not have specified limits. However, the device being used needs to be able to transmit back to the nearest cell tower reliably for connectivity to be maintained.

    [B] Physical obstructions in your environment. Cellular signals rely on line of sight, therefore obstruction like mountains, dense trees or vegetation, and large buildings will impede signal by absorption, reflection, and refraction.

    [C] Poor weather. Clouds and precipitation like rain and snow can diminish signal quality as the water droplets will scatter the signal. Thunder, lightning, and solar phenomenon can also affect signal quality due to their electromagnetic interference.

    [D] Building fabrication. Concrete and metal structures reflect the cellular signal and block its ability to reach cellular network users within them. Brick is full of iron oxide that can scatter signals and layers of insulation, mesh and plaster can absorb much of the transmitted signal before it reaches the devices within a room.

    [E] Network congestion Heavy cellular traffic is a common cause of diminished cellular signals. High throughput of data from multiple users at a particular cell tower will diminish the signal quality and bandwidth locally available.

    How can I improve my cellular signal?

    7 Top Tips for boosting cellular connectivity

    1. Acquire, amplify, and direct a weak signal with a cellular signal booster.

    There are two types of legal cellular repeaters or signal boosters:

    1. Wideband signal boosters amplify across all the major cellular carrier frequencies. These boosters have their maximum gain capped because of their potential to cause interference.
    2. Carrier specific cellular repeaters will only work for the signal of a specific cellular carrier and therefore are permitted higher antenna gain than wideband boosters.

    Cellular signal boosters are typically used in more remote areas but are becoming more widely available as a simple solution for a routinely poor cellular signal. They are of particular benefit if there is a distinct diminishment in signal between the outside and inside of a property. Reputable products are FCC certified and suitable for 2G, 3G, 4G, and LTE connectivity on all the major cellular carriers. These devices are comprised of:

    An outside cellular antenna is mounted at the highest point on the property, or by a window to provide the best chance of capturing the weak cell signal. These donor antennas can be either omnidirectional or directional depending on the precision with which the cellular signal can be located.

    A bidirectional amplifier will boost the incoming cellular signal to an acceptable output measured in decibel-milliwatts and broadcast the outgoing signal from your phone or devices. The most powerful cellular amplifiers deliver a gain of +50 to +70 dB and can provide indoor coverage of u[ tp 7000 sqft.

    An indoor antenna provides the indoor coverage needed to use your cellular network optimally. Rebroadcast antennas are typically ceiling-mounted omnidirectional antennas or wall-mounted panel antennas.

    All components are connected with suitably matched coaxial cable with lengths kept as short as possible to minimize signal loss.

    1. Locate your nearest cell tower.

    Locating the closest cell tower used by your cellular carrier can make a real difference in acquiring an improved signal as you can either position yourself for calls or work on the side of your property that is closest to a local cell tower, or you can use this information to better position an outdoor directional antenna to capture the signal and bring it into your property for an indoor antenna to broadcast. This can be done either by:

    Using a smartphone. You can get a reasonable estimation of signal strength in varying directions by using a ‘field test mode’ or ‘network status’ to view signal strength in decibels.

    Obtaining a cellular spectrum analyzer kit. This kit comes with a directional antenna, signal meter, and cable. The antenna can be rotated while the signal strength for your carrier is monitored. Pinpointing the maximum signal strength allows you to then install a cellular booster in the right position.

    Performing an online search to see mapped information on your carrier’s network of cell towers. Most carriers share cell towers, so the nearest mapped tower is likely to be one that will serve your devices. Using an online cellular coverage checker or map can also help you to compare the “G, 3G, 4G, and 5G coverage provided by the major cellular carriers along with the mobile bitrates that you can expect.

    1. Use cellular devices near a window

    Simply glazed windows are a far less efficient barrier to cellular phone signals than walls and doors. The silicon dioxide that makes up glass allows the electromagnetic energy from cellular signals to pass through with minimal absorption, unlike metal or concrete, making a window ideal for positioning mobile internet devices.

    If being positioned near a window does not improve signal it may because of the type of glazing on the property. Low emissivity (Low-e) glass that is used for its thermal benefits has a metallic film that will reflect electromagnetic energy and operate as a barrier to cell signal entering your property. Some forms of glass are even deliberately coated to block radio frequency signals in certain commercial buildings. In this case, opening the window should greatly improve signal reception.

    1. Tackle physical obstructions that may be blocking your signal.

    Radio frequency signals behave in a similar way to light when encountering obstructive surfaces and materials. The cellular signal can end up being reflected, refracted, or otherwise scattered which leads to the generation of multipath interference. Line of sight with a cell tower is always best for optimal signal strength, so removing objects that may be obscuring the view of your cellular device may improve the signal. Steps to take include moving metal objects in your property like filing cabinets or high sheet metal fencing out of the way. Polling, or cutting down trees or bushes can also help as vegetation can be a key cause of a diminished cellular signal.

    1. Keep your cellular device’s battery fully charged.

    For optimal signal performance, a cellular device needs to maintain connectivity with the nearest cell tower. This requires energy and consumes a large proportion of your device’s battery. When the battery is low in energy a mobile phone will be limited in its ability to find and maintain a strong connection with its nearest cell tower. Also, other wireless communication technologies used by smartphones such as Bluetooth or Near Field Communication (NFC) place additional demands on devices. Switching these off will help conserve battery power and boost a device's ability to maintain its cellular connection.

    1. Mount your outdoor cellular antenna as high as possible.

    If you are using cellular antennas to bring a signal into your property your methods of mounting will make a big difference to the results you achieve. Once you have pinpointed an appropriate location for your outdoor cellular antenna, erecting it with at least 15 feet of vertical separation from the indoor cellular antenna to prevent radio frequency feedback between the antennas that can shut-down any amplifier that you are using. You may need a pole to achieve the height necessary above the roof-line of your property. Also, an indoor antenna should not be positioned in the same vertical line as an outdoor antenna.

    1. Try pairing a 4G or LTE modem or router with an external cellular antenna to increase coverage.

    If you are using the cellular signal for mobile internet, you can install an outdoor mobile modem/router and upgrade its antenna by switching in an alternative with the characteristics you require. This type of arrangement can then be used to provide WiFi or LAN ethernet provision for your property.

    What are the problems caused by poor cellular signal?

    Poor 3G, 4G, or LTE signal causes will deteriorate the service quality and functionality experienced by uses of downstream devices such as cell-phones. Common problems include:

    Reduced quality and interference in voice calls. When cellular signal quality is weak, cell towers will compress voice data, diminishing its quality.

    Dropped calls are precipitated by weak signals, poor weather, or an overloaded local cell tower.

    A prolonged time interval for receiving text messages is further impacted by being between two cell coverage areas or being a significant distance outside of a network coverage area. Heavy network traffic will also impact the speed of receipt.

    ●Slow internet connectivity is caused by poor signal strength as it reduces the bandwidth available to your device for data transfer.

    Inability to utilize streaming services or video calling. Video over Cellular Internet Protocol (VoCIP) requires optimal 3G and 4G/LTE connectivity and speeds.

    Short battery life. A poor cellular phone signal will require your device to expend more energy in maintaining connectivity, leading to more rapid consumption of battery power.

    Conclusions

    Cellular network access is critical if you rely on cellular connectivity for your home or business networking. These techniques for boosting cellular signal strength and quality not only provide your property with better coverage and data speeds but also improved power consumption and reliability. Cellular antenna-based solutions, in particular, are effective at achieving a notable improvement in coverage.

    Top tips to improve wireless signal and range

    Posted by

    WiFi: Top Tips To Boost Your Signal Strength & Performance

    Get the most out of your WiFi network with these top 11 tips to boost WiFi connectivity. 1.  Add external WiFi antennas External antennas added to a router or access point may be able to not only boost but redirect a deficient signal. A replacement antenna often has higher gain and offers the choice of selecting a directional [...]

    Read More »


    WiFi Channels: Complete Guide with Tips to Boost Signal Performance

    Channel planning will help you get the best WIFI connection.Using non-overlapping channels can boost WiFi network performance.What are the best WiFi channels?How can I change WiFi channels?WiFi channels: 2.4 GHzThere are fourteen 20MHz wide channels in the 2.4 GHz frequency band. In North America, only 11 channels, numbered 1 to 11 are legally available for [...]

    Read More »



    Antennas by connector type Signal Loss in Antenna Cables.  LMR-100, LMR-200, LMR-400 Frequency Bands of WiFi, Bluetooth, 5G, 4G, 3G, LTE, GSM, ISM, CDMA


    RP-SMA cables and adapters SMA antenna cables and adapters N-type cables and adapters U.FL cables MHF4 Cables MMCX cables
    Dimensions / Measurements of RP-SMA connectors Signal-loss (attenuation) in LMR-100 and LMR-200 cables BNC cables RP-TNC cables and adapters Roof Mounts for Antennas Cable Glands
    Antenna Cable Adapters Through-hole antenna mounts Adhesive Mount Antennas Tripod Antenna Mounts Combination Antennas LTE GPS WiFi Bluetooth 4G 3G