Antenna LTE 4G LoRa Helium

LTE 4G directional antenna with a multiband frequency range from 800 to 2800MHz. 11dBi

A Directional Cone Yagi design radiates a signal pattern in the direction in which the antenna is pointed but with a wide beam. See the radiation pattern in the images. Directional antennas have less interference than omnidirectional antennas because they focus the signal in a single direction, thereby eliminating much of the signal noise.
For LoRa / LoraWAN, Wi-Fi HaLow This antenna is a solid performer in the 850-920MHz band for Helium miners and LoRaWAN access points. Its wide frequency range does not inhibit its performance in this band. The fact that it has a wide frequency band is of no significance because it performs so well in this band.
It is also suitable for GSM, ZigBee, Wi-Fi HaLow and any other wireless protocol that uses a frequency in the 850-920MHz band. T
See all 900MHz Antenna options: LoRa, LoRaWAN, GSM, and 3G, Wi-Fi HaLow.
Pole-mount U-bolt assembly included.
Data Alliance's high-quality soldered terminations of Type-N connectors with soldering provide a low-loss connection with minimal discontinuities.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

Engineered for modern wireless ecosystems:

Compatible with LoRaWAN access points and LPWAN solutions.
Supports machine-to-machine communication via Wi-Fi HaLow, ZigBee, Bluetooth, and other ISM-band technologies. (Compatible because it is vertically polarized)
Designed around the 900MHz ISM Band, but can be adjusted for broader ISM frequency applications.
Ideal for challenging terrain, including NLOS environments where 900 MHz excels.
LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
- GSM is 3G wireless (Global System for Mobile Communication)
- Global LTE: 2600 MHz band (2.6GHz)
- GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
Fully compliant with Wi-Fi HaLow devices and standards.
WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
The wide frequency support (902–928 MHz), combined with low VSWR and impedance-matched design, ensures strong performance.

This directional Yagi antenna's range of frequency band compatibility in the 800 MHz to 2800 MHz frequency band range, its very low broadband VSWR at 1.6, and its impedance matching to 50 Ohm gear make it suitable and compliant for all the above applications.

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type female Connector Characteristics and Details: Durable, weatherproof connection

Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
N-connector gender is counter-intuitive.
N-Type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

COMPATIBLE L-BRACKET MOUNT:

N materials composition:

Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
Center Contact: Beryllium Copper, Gold Plated
Crimp Ferrule: Copper, Nickel Plated
Insulators: PTFE

RELATED PRODUCTS & PAGES:

All of our antennas pass the QC test before we ship them.

Antenna LTE 4G LoRa 800MHz - 2800MHz Directional Yagi 11dBi w/ N-f