Antenna Dual-Band 2.4GHz 5GHz 5dBi Omnidirectional Dipole w/N male right angle articulating connector

5dBi Dipole antenna with N-male connector: 2.4GHz- 2.5GHz Band

• Omnidirectional and multipoint applications
• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.

Compatibility with wireless standards & applications: This omnidirectional antenna's range of frequency band compatibility in the 2.4 ~ 2.5GHz / 5.1 ~ 5.8 frequency band range, its excellent low broadband VSWR at < 2.0, and its impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

• IoT wireless & M2M: Bluetooth, ZigBee, Wi-Fi HaLow and ISM. Since it is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications.
• 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B, 802.11AH.

Mount Options: See our mount options for antennas with an N-connector (Type-N connector)

• With our N-male connector, they can be easily mounted to an L-mount (for wall or pole mounting) or enclosure to give total wireless coverage.
• Mount on our L-mount options by inserting the N-female connector of your cable into the L-mount from the bottom, screwing the antenna and cable together, and securing with the bulkhead, nut, and washer on the N-female cable.
• Magnetic base option: With an 18-inch cable to RP-SMA male connector, the heavy magnetic base can hold the antenna upright in the wind or on a moving vehicle.

ROHS 3 & REACH compliant: Antenna, cable, and connector are all compliant with ROHS 3 and REACH.

N-type male Connector Characteristics and Details: Durable, weatherproof connection

• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive.
• N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N materials composition:

• Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. However, the articulating (bendable) right angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are recommended for indoor use or protection outdoors, i.e., under an eave. If you need a weatherproof dipole antenna, choose a straight dipole or one with a fixed right angle. See our weatherproof antennas.

• Mount Option: Compatible magnetic mount with N-female connector and cable to RP-SMA-male

RELATED ANTENNAS: