MCX to RP-SMA-female Cable: 8-inch, 10-inch, 12 inch, 14-inch, 18-inch

MCX to RP-SMA-female Cable

Cable: MCX connector To RP-SMA female bulkhead: One end has an MCX (right angle) connector, and the other has an RP-SMA-female connector with bulkhead mount.

The cable is double-shielded, low-loss, and very flexible/easily bendable. The cable type is equivalent to or better than LMR100: Coax with black jacket has the same signal-loss-per-meter and flexibility as LMR100 and less attenuation (signal loss) than RG174 and RG178. The higher quality of the cable of this antenna translates into lower loss/better performance. The cable is equivalent to LMR-100 in thickness.

• The temperature range for operational use of this 100-series coax and the cable assembly is -22 F ~ +185 F (-30 C ~ +85 C)

The MCX connector is compatible with (fits) all devices with an MCX antenna jack, including some Android PCs.

RP-SMA = Reverse Polarity SMA. RP-SMA is a round screw-type connector with medium-sized, threaded coupling connectors rated for frequencies from the lowest (DC) up to 18GHz. This antenna cable is compliant with all types of wireless antennas, including wireless / WiFi networks, BlueTooth, ZigBee, Cellular voice & data, and WiMax: WiFi 6, WiFi 6E, 802.11AX, 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequency between 0 and 18GHz.

The RP-SMA female connector is also called a "jack." It includes a bulkhead nut and washer, which can be used to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection) or on a case, panel, or Printed Circuit Board (PCB).

Our standard RP-SMA female connector (threaded part) is 3/8 inches long. We have a more extended option, 14.5mm, which we can use for special orders.

• • • RP SMA Dimensions
  • Lead-free and ROHS compliant: The entire product (connectors and cable) is ROHS compliant.
  • RP-SMA is a round screw-type connector with medium-sized, threaded coupling connectors rated for frequencies from the lowest (DC) up to 18GHz. This antenna cable is compliant with all types of wireless antennas, including WiFi and WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz & 5GHz applications, as well as any other frequencies between 0 and 18GHz.
    • RP SMA Connector Material Composition
  • Rest assured, our high-quality soldered terminations of RP-SMA and Type-N connectors with soldering provide a low-loss connection, keeping discontinuities to a minimum and ensuring reliable performance.MCX (micro coaxial) connectors are coaxial RF connectors that have a snap-on interface and a 50 Ohm impedance. They offer broadband capability from DC to 6 GHz. The contact surfaces are gold-plated. They have the same inner contact and insulator dimensions as the SMB connector but are 30% smaller.
    • MCX (micro coaxial) connectors are coaxial RF connectors that have a snap-on interface and a 50 Ohm impedance. They offer broadband capability from DC to 6 GHz. The contact surfaces are gold-plated. They have the same inner contact and insulator dimensions as the SMB connector but are 30% smaller.
    • MCX is the external antenna port for the Apple Airport Extreme Base Station. MCX and the smaller MMCX version are frequently used to connect external antennas to GPS receivers. They are also standard on USB DVB-T tuners for computers and laptops to connect an external antenna to the tuner.
    • The outer diameter of the MCX male is approximately 3.6 mm or 0.140 inches. MCX male is also called MCX plug.